|
|
bud22923
User
Oct 29, 2011, 10:54 AM
Post #1 of 29
(6218 views)
|
I have a 2006 Ford F150 4.6 V8 Engine.
What I am wanting to know I put new Spark Plugs in my truck because it was missing bad now it's not missing now but it's going through a lout of gas a lout more then it use to.
Is there something that I have to do because I put those plugs in?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Oct 29, 2011, 12:42 PM
Post #2 of 29
(6191 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
What brand plugs did you put in?
Did you look it over good to make sure you didn't leave any hoses or plugs off?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
bud22923
User
Oct 31, 2011, 12:42 PM
Post #3 of 29
(6167 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
I put Motorcraft spark plugs in it.
Yes I looked, everything is hooked up.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Oct 31, 2011, 1:20 PM
Post #4 of 29
(6162 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
If you can get your hands on a good scan tool you can look at the adaptives and get an idea how it is burning. A new O/2 sensor would be helpful too.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
bud22923
User
Oct 31, 2011, 4:38 PM
Post #5 of 29
(6151 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
I have a scan tool I have the Innova 3140 it has the live data mode on it.
It also has 02 Sensor Test on it.
Non-Continuous test.
And System Test.
(This post was edited by bud22923 on Oct 31, 2011, 4:47 PM)
|
|
| |
|
|
bud22923
User
Nov 2, 2011, 2:18 PM
Post #6 of 29
(6108 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
Ok I did the live Data on the truck and this is what it came up with.
With it idling.
Fuel Sys 1 CL
ECT (F 188
Calc Load 44.3
STFT B1 % -0.7 to 3.1
LTFT B1 % 7.8
STFT B2 % -0.7 to 2.3
LTFT B2 % 7.0
Write me back and let me know what you think I should do.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 2, 2011, 2:58 PM
Post #7 of 29
(6101 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
How long had the truck been running?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
bud22923
User
Nov 2, 2011, 5:15 PM
Post #8 of 29
(6089 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
It was running for over a hour we just got back from the store and I plugged in my scanner and ran the live data.
I just had to turn it off to plug in my scanner and start it back up.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 2, 2011, 5:16 PM
Post #9 of 29
(6088 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
How many miles on this engine?
You trims don't look too bad at idle. What are your trims when cruising at 60 mph?
Pull out your MAF sensor and inspect the elements. If they are dirty, clean them with MAF sensor cleaner or electrical contact cleaner. Don't use brake cleaner or carb cleaner. Inspect your air filter, if you hadn't done that, and see if it needs replacement. Don't try to clean a paper filter.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 2, 2011, 5:22 PM
Post #10 of 29
(6079 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
If your truck was running that long, it appears that you have a problem with temperature. Your ECT read 188 and that is a little cool. It should be around 200What we don't know is if the engine is actually that temp or the sensor is out of calibration. The best way to find out is too check the data after the car has sat overnight and compare the ECT with the MAT (manifold air temp) and they should match. If they do, I would replace the thermostat. DS made some good suggestions also.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Nov 2, 2011, 6:49 PM
Post #11 of 29
(6067 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
If your unit can record data, take it out for a spin and record as much as you can under different conditions....
That little bit you posted helps but you really can't tell much from that....
Engine load at 44% @ idle is a bit high but I agree it does look like it's in fuel control in that snapshot
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 2, 2011, 7:08 PM
Post #12 of 29
(6053 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
I would guess that is represents a percentage of the range of the MAP/MAF sensor.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on Nov 2, 2011, 7:09 PM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 2, 2011, 7:11 PM
Post #13 of 29
(6049 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
This would also reinforce DS's theory of a dirty MAF
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Nov 2, 2011, 7:33 PM
Post #14 of 29
(6034 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
This would also reinforce DS's theory of a dirty MAF
That's actually where I would probably look 1st, Fords are good that. Usually you'll get lean codes but not always.....
At sea level you want to see 159hz, you get down to 150 and that is when you can get some problems & codes... If I remember right every 3hz is a 1000' or at least somewhere around there....
I couldn't tell you the strategy on how the PCM calculates load on this, I'd have to bone up as well, it's not one of the main PIDs I look at but does seem a bit high for idle. Plus Desi's right the ECT looks too low as well, that also could be a problem, especially since it's just sitting there in closed loop.
But we're just seeing a tiny bit of info without know how long it's been running, if it's been driven, ect........
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Nov 2, 2011, 8:10 PM
Post #15 of 29
(6025 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
I was referring to the PIDs, most scanners display both pressure & frequency reading. I just find that frequency is a little more accurate. Especially if you get on that is just slightly skewed, it's not as noticable as pressure a pressure reading.
|
|
| |
|
|
bud22923
User
Nov 4, 2011, 6:22 PM
Post #17 of 29
(5995 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
Where is the Maf sensor located at?
So I can clean it.
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Nov 4, 2011, 9:20 PM
Post #18 of 29
(5985 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
It's in the air cleaner housing. Be sure you get the sensing wire real good and use the correct cleaner. Do use carb clean or throttle body cleaner. Use MAF cleaner
 
|
|
| |
|
|
bud22923
User
Nov 5, 2011, 9:27 PM
Post #19 of 29
(5972 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
Yes I know I did not write that down, I know on the scanner it did say how long it was running and I should of wrote that down so you knew how long it had been running but I don't know the exact minutes it was running.
I don't remember what it said for minutes.
I am going to try the easy things first like change the air filter and clean the sensor.
I will let everyone know if it's still going through fuel.
And I will run onther live data check on it and record everything that's going on and post it for you to see what other things I can check on.
|
|
| |
|
|
bud22923
User
Dec 5, 2011, 5:47 PM
Post #20 of 29
(5892 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
Hammer Time
Is there any way I can email you I am still having problems with my Ford F150 going through Fuel I cleaned the MAF Censer and I also changed the Thermostat but it's still running at 186 to 188 F going down the road.
I have all the live data that I did on my scanner I have 10 Frames but I can not post them on here because I can not put a Image file on here.
Please write me back and let me know how I can get them to you to see what you think.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Dec 5, 2011, 5:51 PM
Post #21 of 29
(5889 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
We don't do anything outside of the forum. You can upload the images to an image hosting site like Photobucket or Image Shack and they will supply a link you can put here into your question that will make the picture show up here.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
bud22923
User
Dec 6, 2011, 9:03 PM
Post #22 of 29
(5865 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
Hammer Time
Here are 3 that I put on there if you need more let me know.
Click here
And let me know what you think.
(This post was edited by Hammer Time on Dec 7, 2011, 4:01 AM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Dec 7, 2011, 4:06 AM
Post #23 of 29
(5851 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
I edited them into your question.
The one thing that jumps out at me is the Intake air temp of 32 degrees. You didn't install any kind of chip into did you?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
bud22923
User
Dec 7, 2011, 8:52 AM
Post #24 of 29
(5844 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
Hammer Time
No I did not install anything.
Do you think my Engine coolant is running cold?
I put a new thermostat in.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Dec 7, 2011, 9:06 AM
Post #25 of 29
(5837 views)
|
|
Re: 2006 Ford F150
|
Sign In
|
|
That's not what I said at all. I said the Intake Air temp sensor is reading too low. It could be a faulty sensor, or a wiring or PCM problem. The sensor is built into the Mass Air Flow sensor so to replace it you would have to replace the whole MAF.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
1
