|
|
1994 mx6 blinker and brake lights not working
|
|
|
| |
|
slim696901
User
Nov 6, 2012, 4:26 PM
Post #26 of 37
(1302 views)
|
Re: 1994 mx6 blinker and brake lights not working
|
Sign In
|
|
so now after doing nothing to the car the pump is kicking in but the car will not start it will try and might run for 2sec but then shuts down (this car is geting to me ) lol
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 6, 2012, 4:41 PM
Post #27 of 37
(1295 views)
|
Re: 1994 mx6 blinker and brake lights not working
|
Sign In
|
|
You need to put a fuel pressure gauge on this and stop guessing about the fuel pressure. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 6, 2012, 5:13 PM
Post #29 of 37
(1287 views)
|
Re: 1994 mx6 blinker and brake lights not working
|
Sign In
|
|
I don't know. You have been asked for the engine size 3 times and still haven't posted it. You're just wasting a whole bunch of peoples time here running in circles.. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
slim696901
User
Nov 6, 2012, 6:20 PM
Post #30 of 37
(1282 views)
|
Re: 1994 mx6 blinker and brake lights not working
|
Sign In
|
|
its a 2.5 v6 that all i know
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 6, 2012, 6:27 PM
Post #31 of 37
(1280 views)
|
Re: 1994 mx6 blinker and brake lights not working
|
Sign In
|
|
That's all we asked for. the previous diagram was for the 2.0 so here is the new diagram. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 6, 2012, 6:34 PM
Post #32 of 37
(1277 views)
|
Re: 1994 mx6 blinker and brake lights not working
|
Sign In
|
|
Here is a picture of the PCM plug. "3T" is the fuel pump control wire. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
slim696901
User
Nov 10, 2012, 10:04 AM
Post #33 of 37
(1261 views)
|
Re: 1994 mx6 blinker and brake lights not working
|
Sign In
|
|
Hello so i tested the fuel pressure to day and it gets up to 40 psi but then drops really fast after i trun the pump off i clamped the return line it will get up to 60 psi and then drops really slow (maybe my clamp on the return line was letting a little gas by )? any ideas ??? as s side note the car will start up arter cranking fir a min but it will not stay running it fires up runs for maybe 2 sec then shuts down
(This post was edited by slim696901 on Nov 10, 2012, 10:23 AM)
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 10, 2012, 11:53 AM
Post #34 of 37
(1250 views)
|
Re: 1994 mx6 blinker and brake lights not working
|
Sign In
|
|
Here are the specs. The rapid leakdown is a symptom of a bad regulator. FUEL SYSTEM PRESSURES Hold More than 21 psi (150 kPa) Line 39 - 45 psi (270 - 310 kPa) Maximum 64 - 92 psi (450 - 630 kPa) FUEL PUMP PRESSURES Hold More than 50 psi (340 kPa) Maximum 72 - 92 psi (500 - 630 kPa) PRESSURE REGULATOR LINE PRESSURES With Vacuum 30 - 36 psi (210 - 250 kPa) W/O Vacuum 39 - 45 psi (270 - 310 kPa) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
slim696901
User
Nov 10, 2012, 1:28 PM
Post #35 of 37
(1244 views)
|
Re: 1994 mx6 blinker and brake lights not working
|
Sign In
|
|
so i changed out the regulator the fast leek is not a really slow one also when im turning over the car the psi is about 25 psi sound about right ? when i try and start the car it will run about 2 sec then die if i try and give it gas it seem to chock out like to much air or not getting as much fule as needed
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 10, 2012, 1:34 PM
Post #36 of 37
(1236 views)
|
Re: 1994 mx6 blinker and brake lights not working
|
Sign In
|
|
If you can't read I'm not going to keep answering the same question. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
slim696901
User
Nov 10, 2012, 1:43 PM
Post #37 of 37
(1235 views)
|
Re: 1994 mx6 blinker and brake lights not working
|
Sign In
|
|
i can read and did read but it says nothing about what it should be with the car running and the pump is pumping what it should according to your post but its ok i got it going not there is a 1/2 hose the plugs in to the back of the air cleaner pipe i did not have the plugged is so the car would not start
(This post was edited by slim696901 on Nov 10, 2012, 1:44 PM)
|
|
| |
|