|
|
jeremy1
New User
Sep 4, 2013, 10:56 AM
Post #1 of 9
(2171 views)
|
i have a 02 dodge grand caravan 3.8L im getting a 0171 trouble code #1 bank running lean. i dont realy notice a diffrecne in the way it runs in till i turn on the ac
then surges and hesitate but mostly at idel
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 4, 2013, 11:32 AM
Post #2 of 9
(2159 views)
|
Check it very carefully for any vacuum leaks.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 5, 2013, 7:05 AM
Post #4 of 9
(2133 views)
|
You've been watching too many Scotty Kilmer videos.
Test the 0/2 to determine if it is capable of going rich.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Sep 5, 2013, 7:21 AM
Post #5 of 9
(2131 views)
|
Has its dangers but carb cleaner targeting a possible leak should change the idle for better or worse when you hit one or more. Cooler engine and AYOR as there's risk of fire - be ready,
T
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Sep 5, 2013, 7:30 AM
Post #6 of 9
(2125 views)
|
Your vehicle doesn't have a MAF.
If you are smoking an engine to find vacuum leaks, you have to plug the intake ducting.
You really need to find out what was going on when the lean code set. This can be done by looking at freeze frame data with an enhanced scan tool. You can also look at fuel trim data to see if you have a vacuum or fueling problem.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 5, 2013, 8:13 AM
Post #7 of 9
(2119 views)
|
Since it's only happening to one side of a V6 engine, I would be highly suspicious of the 0/2 sensor.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Sep 5, 2013, 9:14 AM
Post #8 of 9
(2113 views)
|
It has only one upstream O2.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 5, 2013, 9:22 AM
Post #9 of 9
(2109 views)
|
Aaaaaaaaah...................... so it does.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
