|
|
engine swap for a 95 ranger
|
|
|
| |
|
nshort402
New User
Mar 2, 2013, 6:51 PM
Post #1 of 4
(1876 views)
|
engine swap for a 95 ranger
|
Sign In
|
|
i have a 95 ford ranger with the 3.0l automatic trans and i have a 4.0l same year motor still in the truck just rolled over not drivable can you put a 4.0l on a 3.0 trannie
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Mar 2, 2013, 7:10 PM
Post #2 of 4
(1848 views)
|
Re: engine swap for a 95 ranger
|
Sign In
|
|
It will probably bolt up, but the 4R44E wasn't designed for the power of the 4.0L. You really need to have the 4R55E. Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Mar 2, 2013, 7:16 PM)
|
|
| |
|
nshort402
New User
Mar 2, 2013, 7:12 PM
Post #3 of 4
(1842 views)
|
Re: engine swap for a 95 ranger
|
Sign In
|
|
there both an automatic
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Mar 2, 2013, 7:34 PM
Post #4 of 4
(1829 views)
|
Re: engine swap for a 95 ranger
|
Sign In
|
|
I take that back. If you do some research, there have been others that have asked the same question in other forums. It seems the 3.0L's bellhousing bolt pattern is different than the 4.0L. You would have to swap the bellhousings. Even then the 4R44E won't last behind the 4.0L and there is a difference in PCM software, so you can't use the 4R44E with the 4.0L's PCM. Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|