|
|

Adisturbedal
New User
Nov 12, 2012, 8:41 PM
Post #1 of 6
(1938 views)
|
Rear swap
|
Sign In
|
|
Hello I have a 2002 dodge durango with a bad rear I want to swap it out with another one. My ? Is which is easier to do pull the axles and backing plates to get the rear out. Or drop the leaf springs in the back by the shackles.
|
|
|  |
|

Hammer Time
Ultimate Carjunky
/ Moderator

Nov 13, 2012, 4:11 AM
Post #2 of 6
(1898 views)
|
Why are those your only choices? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
|  |
|

Adisturbedal
New User
Nov 13, 2012, 9:00 AM
Post #3 of 6
(1888 views)
|
If there's other ways of getting the rear out any info on that would be greatly appreciated.
|
|
|  |
|

Hammer Time
Ultimate Carjunky
/ Moderator

Nov 13, 2012, 9:10 AM
Post #4 of 6
(1883 views)
|
What's stopping you from sliding it through the springs? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
|  |
|

Adisturbedal
New User
Nov 13, 2012, 11:15 AM
Post #5 of 6
(1877 views)
|
Don't think the backing plate will clear in between the wheel well and the springs
|
|
|  |
|

Hammer Time
Ultimate Carjunky
/ Moderator

Nov 13, 2012, 11:22 AM
Post #6 of 6
(1871 views)
|
I never had one that didn't but if you have to you can drop one shackle. The spring placement is inward of the wheel well so the differential should be able to be lifted over the spring after clearing the wheel well. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
|  |
|