|
|
brian810
New User
Aug 1, 2011, 9:38 PM
Post #1 of 6
(5466 views)
|
|
broken frame bolt
|
Sign In
|
|
is there any tricks out there that dont require removal of the frame to extract the rear frame bolt under the steering column. it broke on me doing an r&r on the rack n pinion .97 monte carlo 3.4
about 2 inches of the bolt is hanging out , i plan on heating it with a lil hand torch n some vise grips but that is after i buy the torch ..
(This post was edited by brian810 on Aug 1, 2011, 9:59 PM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 2, 2011, 3:12 AM
Post #2 of 6
(5453 views)
|
|
Re: broken frame bolt
|
Sign In
|
|
I wouldn't waste my money on a torch id I were you. First off, the torch that you would buy would not have insufficient heat to have any effect . You would need Oxy-Acetalyne and second, you'd be heating the wrong piece. heating the bolt would expand the bolt and make your problem even worse. The only time heat helps is when you are heating the nut to expand it off of the bolts and since that part is inside the frame, that won't happen.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Aug 2, 2011, 5:34 PM
Post #3 of 6
(5432 views)
|
|
Re: broken frame bolt
|
Sign In
|
|
If you're talking about one of the column mounting bolts and you were putting it in when it broke.
Then it's crossed threaded & it's going to need to be drilled out....
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 2, 2011, 5:54 PM
Post #4 of 6
(5428 views)
|
|
Re: broken frame bolt
|
Sign In
|
|
I assumed he was talking about a subframe bolt.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Aug 2, 2011, 5:58 PM
Post #5 of 6
(5425 views)
|
|
Re: broken frame bolt
|
Sign In
|
|
You're probably right now that I reread it....... I saw column & thought of the 4 bolt plate that holds the column but you shouldn't have to remove that to do a rack....
If it is a sub-frame bolt and it broke coming out there must be a lot of rust to deal with so it's probably gonna have to be drilled..... I don't think I've ever seen one of those break..........
|
|
| |
|
|
brian810
New User
Aug 2, 2011, 7:42 PM
Post #6 of 6
(5414 views)
|
|
Re: broken frame bolt
|
Sign In
|
|
well torch failed so i ended up bending this lil tab aside(on the out side next to frame) and punching a hole threw the floor board an then just chiseled 3 of the 4 lines in a square an bent it up.needless to say i cut the bracer for the nut and it was out... it sounds like a lot but realy when i went to the yard to get the bolt n nut i did it as fast as my buddy pulled an egr vavle off a saturn.. very short, short cut....good luck to any one else.but worked like a charm for me.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
