|
|
trans suddenly does nothing...
|
|
|
| |
|
|
mopar_monkey
Novice
Jan 5, 2013, 9:42 PM
Post #1 of 16
(1718 views)
|
|
trans suddenly does nothing...
|
Sign In
|
|
Have an 01 ram with a 5.9l and a 45re trans. I put a remaned jasper tranny in it 60k ago. The trans had been working perfectly then one night i was cruising on the freeway at 65 mph, it was raining hard and i hit some deep standing water in the road at that point the trans stopped working. No noise, no slipping or shifting issues it just will not go into gear anymore. Before when putting it in gear you could hear some solenoid noise but nothing out of normal but now i can hear it at all, all connectors are connected. I am thinking tcm issues but dont want to shell out $500 on an educated guess.
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Jan 5, 2013, 11:55 PM
Post #2 of 16
(1695 views)
|
|
Re: trans suddenly does nothing...
|
Sign In
|
|
Start off with getting the codes pulled....If there are any tranny codes it will take a high end scanner to get the exact code numbers but the good thing is, if there are any tranny codes, it will store a P0700 in the PCM and you can get that with a cheap scanner.
On your's if you cycle the key from the off to on position 3 times, you should be able to see any store PCM codes in the odometer....You have to time it right, not to slow or not to fast and don't crank it....
I'm assuming you've got under it and looked at the linkage & everything else....
|
|
| |
|
|
mopar_monkey
Novice
Jan 6, 2013, 1:48 AM
Post #3 of 16
(1688 views)
|
|
Re: trans suddenly does nothing...
|
Sign In
|
|
Yes first thing i checked was linkage, also scanned codes and found no codes to be present.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jan 6, 2013, 5:19 AM
Post #4 of 16
(1680 views)
|
|
Re: trans suddenly does nothing...
|
Sign In
|
|
You aren't going to find any code with a generic code reader. You need professional equipment that can read the TCM.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jan 6, 2013, 6:59 AM
Post #5 of 16
(1673 views)
|
|
Re: trans suddenly does nothing...
|
Sign In
|
|
You sure that you don't have a 46RE? Van or truck? Series? 4WD?
Either way the transmission has to come apart if you have no reverse.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Jan 6, 2013, 7:10 AM)
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Jan 6, 2013, 9:35 AM
Post #6 of 16
(1656 views)
|
|
Re: trans suddenly does nothing...
|
Sign In
|
|
What is the warranty on your tranny?.....I've had pretty good luck with Jasper, if you are still under the period give them a call before any tear down work.....
|
|
| |
|
|
mopar_monkey
Novice
Jan 6, 2013, 1:30 PM
Post #7 of 16
(1641 views)
|
|
Re: trans suddenly does nothing...
|
Sign In
|
|
The tranny only had a 40 k warrenty. I pulled codes a genisis scan tool so it should pick up anything tcm related. Not only do i not have reverse but i have nothing at all, the way it happened leads me to belive it is electrical some how, thanks for all the input, i'm really stumped on this one.
|
|
| |
|
|
mopar_monkey
Novice
Jan 6, 2013, 1:51 PM
Post #9 of 16
(1634 views)
|
|
Re: trans suddenly does nothing...
|
Sign In
|
|
I pulled codes a genisis scan tool so it should pick up anything tcm related. Not unless it has the software to go with it.
It better for the $2,500 it cost
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jan 6, 2013, 2:22 PM
Post #10 of 16
(1629 views)
|
|
Re: trans suddenly does nothing...
|
Sign In
|
|
That's peanuts in today's world and if additional transmission modules were not purchased for it, then it won't work. A PCM card will not work on a transmission.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Jan 6, 2013, 2:23 PM
Post #11 of 16
(1626 views)
|
|
Re: trans suddenly does nothing...
|
Sign In
|
|
Electrical really isn't going to give you absolutely nothing.....You would have shifting problems, also there would be codes....
The exact codes would be in the TCM and there would be a P0700 generic trans fault in the PCM indicating set tranny codes....
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jan 6, 2013, 8:00 PM
Post #12 of 16
(1612 views)
|
|
Re: trans suddenly does nothing...
|
Sign In
|
|
There is nothing electrical controlling reverse. No reverse and the fluid level is good then the transmission has an internal problem. That is as long as your transfer case is in one piece, the driveshaft isn't laying on the ground, or differential didn't break.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
mopar_monkey
Novice
Jan 6, 2013, 9:44 PM
Post #13 of 16
(1595 views)
|
|
Re: trans suddenly does nothing...
|
Sign In
|
|
Update, just checked line psi at the cooler lines and had 0 psi, removed the cooler line to see if i had any flow and nothing came out...tranny is shot. Thanks for everyones help on this.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jan 7, 2013, 8:48 AM
Post #14 of 16
(1580 views)
|
|
Re: trans suddenly does nothing...
|
Sign In
|
|
One last maybe shot. If trans filter fell off this can happen just that fast as it wouldn't reach the fluid in the pan and would do nothing with no pressure,
T
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jan 7, 2013, 10:21 AM
Post #15 of 16
(1573 views)
|
|
Re: trans suddenly does nothing...
|
Sign In
|
|
No, it would still suck the fluid around the filter.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jan 7, 2013, 10:31 AM
Post #16 of 16
(1569 views)
|
|
Re: trans suddenly does nothing...
|
Sign In
|
|
I simply don't know the style of how filter is in there or how held. The issue is rare and usually soon after one has been changed that didn't work out. Fluid certainly can stay below where it will pick up on some even, - T
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Drive Shaft Repair
2006 Toyoto Camry XLE Driver Side Electric Window Trouble
Grounding Cable, 2017 Jeep Renegade Trailhawk
equipment
Howdy
