|
|
trans. stopped working and then worked again.
|
|
|
| |
|
snk180
New User
Jul 11, 2011, 7:56 AM
Post #1 of 7
(2797 views)
|
trans. stopped working and then worked again.
|
Sign In
|
|
2003 chevy impala 3.4 v6 about 90k miles the shift lever is on the steering column hello.im going be as detailed as i can. and excuse my spelling and grammar, English is not my native language. yesterday i was driving normally(it was a hour long drive) then i stopped and when i was going to move the car barely pulled.drove like this like for 50 ft and then stop again to turned around. put the gear on R and it didnt do nothing then back again on D and the same. like it was in neutral. went thru the gears several times and nothing. then put it on P turned off the car and quickly turned back on, and the gears engaged like the problem before never happened.this has never happened before. what could this be? im going to check fluid later. could this be anything else besides trans fluid, filter or pump? thanks in advance. your input will be greatly appreciated.
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jul 11, 2011, 9:33 PM
Post #2 of 7
(2772 views)
|
Re: trans. stopped working and then worked again.
|
Sign In
|
|
First thing is that you should check the fluid level and condition and then get back with us about that. Low fluid level can cause low line pressure which equals no engagements or slipping. Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jul 13, 2011, 5:59 PM
Post #5 of 7
(2733 views)
|
Re: trans. stopped working and then worked again.
|
Sign In
|
|
Was the fluid dark? Did it smell funny? Usually, it a mechanical/hydraulic problem in the transmission when you don't have any gears or engagement when you select a gear. If electronics fail for some reason, the electronic transmissions usually default to one gear and reverse. You might want to swing into a transmission shop and have them take a look to see what is going on. Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jul 15, 2011, 7:19 PM
Post #7 of 7
(2690 views)
|
Re: trans. stopped working and then worked again.
|
Sign In
|
|
Let us know what you find out. Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|