Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









2004 Pontiac Sunfire No Movement


Search for (search options)
 



mcclanahandusty
New User

Oct 9, 2011, 4:03 PM

Post #1 of 3 (3690 views)
2004 Pontiac Sunfire No Movement Sign In

i have close the same problem my 2004 pontiac sunfire was running perfect then i got a new starter cause it was clicking and not starting up right away then the next day after i got the new starter i parked the car and came back out and it started but when i put it in drive it would rev but no movement i dont think its the tranny cause it was recently installed 2 years ago but any input would help i am just cluelessMad


**Moved your post to this new thread in this section, so there is no confusion. Please next time create a new thread instead of hijacking another thread**


(This post was edited by Discretesignals on Oct 9, 2011, 4:35 PM)


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Oct 9, 2011, 6:26 PM

Post #2 of 3 (3663 views)
Re: 2004 Pontiac Sunfire No Movement Sign In

Good job moving that DS



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Oct 10, 2011, 4:55 AM

Post #3 of 3 (3650 views)
Re: 2004 Pontiac Sunfire No Movement Sign In

Thanks, you keep clicking things and something is bound to happen.


To the OP.

Can't really check the transmission fluid on that unless you don't mind getting under the vehicle and taking the fill plug out with the engine running to see if there is enough fluid in the transmission. Are there any transmission oil leaks? No movement on a 4t40E isn't a good sign, so checking fluid level should be the first thing you should do.

Another important thing you should check is to be sure the transmission shifter cable is attached to the transmission and moves the lever on the transmission. Seen many where the cable eyelet breaks.





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.

(This post was edited by Discretesignals on Oct 10, 2011, 4:58 AM)






 
 
 






Search for (options) Privacy Sitemap