|
|
Transmission not going in gear after chaning fluid
|
|
|
| |
|
jhbhoward
New User
Oct 24, 2008, 6:51 PM
Post #1 of 2
(2087 views)
|
Transmission not going in gear after chaning fluid
|
Sign In
|
|
1993 Chevrolet Corsica 124,000 miles 6 cylinder I had a bad transmission leak and needed to replace the gasket and did the transmission filter as well. The car ran fine, but after changing the fluid and adding 4 qt dexron iii and the stick showing full it will not attempt to go into gear at all. I am thinking to go ahead and redo the process, maybe the filter came unattached or something? Does anybody have any suggestions or had this problem. Thanks John
|
|
| |
|
chevyrocks8727
New User
Feb 3, 2010, 8:45 AM
Post #2 of 2
(1775 views)
|
Re: Transmission not going in gear after chaning fluid
|
Sign In
|
|
Im prety sure that the filter may have came loose. remove the pan and make sure its fully attached to the valve body. In some tranny models, it comes with a seal like an o-ring shape when you buy a filter kit. Double check the filter seal. If the filter comes out easy, replace the seal a new one. hope this will fix the problem.
|
|
| |
|