Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN






Transmission Support Question


Search for (search options)
 



technoplume
Novice

Mar 13, 2017, 5:08 PM

Post #1 of 2 (1470 views)
Transmission Support Question Sign In

Hi,
2010, Chrysler 300, Touring RWD 3.5L, 118Km

I change the transmission support tonight and I had some trouble putting 1 screw back.
So I took the cross member screws off, and the support was holding it by the 2 screws.
The cross member came free and rotated about 10 to 15 degree,
this is probably due to the tension when I torque the screw.

Question is, is this normal, is there a trick for the support to not do that ?

The torque I found is 48 Nm for the cross member to the frame, and 68Nm for the cross member to the support.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Mar 13, 2017, 6:02 PM

Post #2 of 2 (1465 views)
Re: Transmission Support Question Sign In

You probably either have the wrong mount or mounted it backwards.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







 
 
 






Search for (options) Privacy Sitemap