|
|
Replaced Neutral safety switch no wont shift right
|
|
|
| |
|
cat_meow2001
Novice
Oct 8, 2011, 6:26 PM
Post #1 of 1
(1659 views)
|
Replaced Neutral safety switch no wont shift right
|
Sign In
|
|
We thought the neutral safety switch was bad but now that we have changed it the reverse lights are on in all gears and it wont shift properly or at all. We are not really sure if the piston valve are right with the right springs in them. We have taken it apart twice and switched the springs to were it looked like they belonged according to the wear marks. When I step on the gas it takes a minute to engage most of the time and going down the road it will not shift into gears like it should. Can anyone give an idea of what might be wrong or if there is a diagram I could see to make sure the two valves are in right with the right springs. There are three spring all are different in size but one is painted green the other two look similar in the type of spring it is but one is smaller than the other. Year 1996 Make Plymouth Model Breeze Engine 2.0 Thanks
|
|
| |
|