|
|
|
Oil in Bellhousing 91 GMC Sierra
|
|
|
| |
|
|
WilliamH4
User
Jun 1, 2019, 12:04 PM
Post #26 of 33
(1421 views)
|
Re: Oil in Bellhousing 91 GMC Sierra
|
|
|
Glad you were right there, HT. Just standing by to check the message board. Thanks again.
|
|
| |
|
|
WilliamH4
User
Jun 1, 2019, 1:28 PM
Post #27 of 33
(1405 views)
|
|
Re: Oil in Bellhousing 91 GMC Sierra
|
|
|
HT, anything wrong with moving forward with installing the new clutch release cylinder and using it to engage the clutch arm? I can't quite get the leverage I need against the clutch arm. It's so far inside the clutch housing, it's difficult to engage. I even sawed off a broom stick, stuck it in, then used a C clamp. Still, not real good options for leverage with the C clamp. I can keep moving the transmission around, but it's not cooperating much. Thought I should try your idea with the clutch.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jun 1, 2019, 3:29 PM
Post #28 of 33
(1384 views)
|
|
Re: Oil in Bellhousing 91 GMC Sierra
|
|
|
That probably wouldn't be a good idea since the bellhousing is still not fully seated you may over extend the slave cylinder and cause the piston to pop out and ruin your slave cylinder.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
WilliamH4
User
Jun 3, 2019, 7:36 AM
Post #29 of 33
(1357 views)
|
|
Re: Oil in Bellhousing 91 GMC Sierra
|
|
|
Got it all together and everything is working great. However, it didn't right when I first started the truck and tried shifting. The truck wouldn't go into any gear, except reverse, initially. So we bled the clutch line again, and pumped the clutch for a while. Eventually, we were able to get into each of the gears, but it was a little hard shifting. After a few minutes, shifting became very smooth, no issues. Is that normal (all the difficulty in the beginning)?
(This post was edited by WilliamH4 on Jun 3, 2019, 7:42 AM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jun 3, 2019, 7:46 AM
Post #30 of 33
(1341 views)
|
|
Re: Oil in Bellhousing 91 GMC Sierra
|
|
|
Yes bleeding is always a big issue with those a real pain in the ass
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jun 3, 2019, 8:12 AM
Post #31 of 33
(1335 views)
|
|
Re: Oil in Bellhousing 91 GMC Sierra
|
|
|
Congrats William! You've earned your stripes and what a great read this was.
Trick to bleeding hydraulic clutches isn't listed is quite simple: PUT TRUCK ON IT'S ROOF! This also requires a willing helper (they do this just once) locked inside to push the pedal feverishly at the threat of you not letting them out. Works like a charm but you lose that helper forever! Good luck finding another next time,
(Yes I'm joking)
Tom
(This post was edited by Tom Greenleaf on Jun 3, 2019, 8:15 AM)
|
|
| |
|
|
WilliamH4
User
Jun 3, 2019, 11:04 AM
Post #32 of 33
(1317 views)
|
|
Re: Oil in Bellhousing 91 GMC Sierra
|
|
|
LOL, TG and thank you. Thank you, HT.
This forum and the input from you guys was invaluable. It's as if someone was with me all along, helping with each step.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jun 3, 2019, 1:12 PM
Post #33 of 33
(1301 views)
|
|
Re: Oil in Bellhousing 91 GMC Sierra
|
|
|
Glad you got it worked out.
I will close this now as solved.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
