|
|
97'Saturn SL1 won't shift correctly
|
|
|
| |
|
Lane0824
New User
May 11, 2013, 4:00 PM
Post #1 of 8
(3103 views)
|
97'Saturn SL1 won't shift correctly
|
Sign In
|
|
We just changed the engine in my saturn. Automatic Transmission shifted fine b4 engine swap. We started and the car shift 1, 2, 3 times then the engine rev like the car jumped to neutral. Service light came on. I thought I messed up the Computer by leaving the batt disconnected too long but when I took it to the dealership to get it flashed they said it did not need flashing cause no codes were missing. I took it to 3 Chevy dealers and they all said the same thing. So I went home changed the fluid, filter, and speed sensor. The problem is still there. Anyone know what's wrong with my trans? Ugh pls help!
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
May 11, 2013, 4:33 PM
Post #2 of 8
(3089 views)
|
Re: 97'Saturn SL1 won't shift correctly
|
Sign In
|
|
Are there any codes being stored in the PCM? Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
Lane0824
New User
May 12, 2013, 4:32 AM
Post #3 of 8
(3049 views)
|
Re: 97'Saturn SL1 won't shift correctly
|
Sign In
|
|
No the dealer said no codes came up
|
|
| |
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
May 12, 2013, 7:16 AM
Post #4 of 8
(3039 views)
|
Re: 97'Saturn SL1 won't shift correctly
|
Sign In
|
|
You said "Service Engine Soon" light came on? There should be a code waiting if so, T
|
|
| |
|
Lane0824
New User
May 12, 2013, 7:50 PM
Post #5 of 8
(3017 views)
|
Re: 97'Saturn SL1 won't shift correctly
|
Sign In
|
|
Yes I agree but no code came up and i find that odd. The Service light came on but not the service engine soon light. The service light is just for the transmission
|
|
| |
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
May 12, 2013, 10:20 PM
Post #6 of 8
(3012 views)
|
Re: 97'Saturn SL1 won't shift correctly
|
Sign In
|
|
Sorry - plain reminder light isn't what I was thinking. Best I can say is that if this worked prior to the job than recheck all elctrical connections and linkage from shifter working properly where things were disturbed, T
|
|
| |
|
HT
User
May 13, 2013, 3:13 AM
Post #7 of 8
(2997 views)
|
Re: 97'Saturn SL1 won't shift correctly
|
Sign In
|
|
The transmission is about the only thing that doesn't turn the "service" light on. From what i can see this car doesn't even have a TCM. SERVICE (WRENCH) TELLTALE The SERVICE (Wrench) telltale is turned On by the cluster when it receives a command from the Powertrain Control Module (PCM) , Body Control Module (BCM) , or the Electronic Brake Traction Control Module (EBTCM) , The PCM or BCM will turn the SERVICE (Wrench) telltale On for all non-emission related diagnostic trouble codes (DTCs) that require that a telltale be turned On (some DTCs do not turn on a telltale but are stored to aid in diagnosis). The SERVICE (Wrench telltale will also be turned On if the EBTCM has detected a fault in its own warning indicator system. If the Antilock Braking System (ABS) system cannot turn on its own telltale, a message will be sent to the cluster to turn on the SERVICE (Wrench) telltale. The SERVICE (Wrench) telltale will be displayed for 2-3 seconds during startup for bulb check purposes.
(This post was edited by HT on May 13, 2013, 3:14 AM)
|
|
| |
|
saturn tech
User
May 14, 2013, 8:30 PM
Post #8 of 8
(2970 views)
|
Re: 97'Saturn SL1 won't shift correctly
|
Sign In
|
|
The trans is controlled by the PCM, there should be codes with what you describe...
(This post was edited by saturn tech on May 14, 2013, 8:33 PM)
|
|
| |
|