Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









1998 oldsmobile


Search for (search options)
 



gfj
New User

Nov 23, 2009, 7:23 PM

Post #1 of 6 (1678 views)
1998 oldsmobile Sign In

My 1998 oldsmobile achieva, V6, auto trans, front wheel drive, 135,000 miles, seemed to be missing, I changed plugs and wires, throttle sensor, than after closer checking, I think it is the TCC, it seems to be kicking in and out between the speeds 58-70. I changed the trans fluid and filter but didn't help. I have been able to only get 1 code and it said loose connection. i have checked all and tighten them but still jerking at these speeds, only does this in overdrive, in drive it runs fine. do you have any suggestions what I need to check.
Thanks
gfj


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Nov 23, 2009, 7:31 PM

Post #2 of 6 (1670 views)
Re: 1998 oldsmobile Sign In

There are no codes that say anything about loose connections. What was the exact code number?



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



gfj
New User

Nov 24, 2009, 7:41 PM

Post #3 of 6 (1658 views)
Re: 1998 oldsmobile Sign In

On my hand held scanner it said loose connection check TCC, which I have , but no luck


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Nov 24, 2009, 7:44 PM

Post #4 of 6 (1655 views)
Re: 1998 oldsmobile Sign In

I don't know what kind of nonsense your scanner is telling you but codes supply specific data information. They don't make conclusions like loose connections. I need a number.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



gfj
New User

Nov 24, 2009, 7:49 PM

Post #5 of 6 (1648 views)
Re: 1998 oldsmobile Sign In

Sorry to have wasted your time but that is what it said , NO numbers.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Nov 24, 2009, 7:52 PM

Post #6 of 6 (1644 views)
Re: 1998 oldsmobile Sign In

All codes are identified by numbers so you just need a different scanner. It will start with a "P" and then 4 numbers.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



(This post was edited by Hammer Time on Nov 24, 2009, 7:53 PM)






 
 
 






Search for (options) Privacy Sitemap