Main IndexAuto Repair Home Search Posts SEARCH
Who's Online WHO'S
Log in LOG

Search Auto Parts

toy 4 runner front wheel bearings

  Email This Post


Dec 2, 2013, 5:46 PM

Post #1 of 3 (1108 views)
toy 4 runner front wheel bearings Sign In

  I have a 1999 Toyota 4 runner 3.4 four wheel drive. have to replace front rotor dust shields. the bearing assembly has to be removed to do so. my question is can the bearing be pressed out and back in with out damaging it. and at what point do you press on, to remove. the slip ring, speed censer ring, or the spline part of the hub. yes I know not a fun job LOL

Ultimate Carjunky / Moderator
Discretesignals profile image

Dec 2, 2013, 6:04 PM

Post #2 of 3 (1104 views)
Re: toy 4 runner front wheel bearings Sign In

You'll need a new bearing. It is impossible to reuse the old one. You have to replace the inner and out grease seals also, so you'll need those. Your best bet is to remove the knuckle and let a shop press the bearing for you.

Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.

(This post was edited by Discretesignals on Dec 2, 2013, 6:06 PM)


Dec 2, 2013, 6:16 PM

Post #3 of 3 (1094 views)
Re: toy 4 runner front wheel bearings Sign In

well I have access to a press and feel I can handle it. have done similar ones in the past, but that was to just replace the bearing. most end up toast being removed. just wanted another head, in on this. thanks for the respond

  Email This Post

Feed Button

Search for (options) Privacy Sitemap