Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

ac compressor replacement


  Email This Post



blm1858
New User

Nov 14, 2009, 6:52 PM

Post #1 of 6 (2598 views)
ac compressor replacement Sign In

Hello,I'm trying to fix a problem with the ac compressor on a 1989 Olds regencey 98.It started with a noise coming from the compressor when ac is off.So I started researching..thinking i could replace bad clutch bearing..I removed the clutch and attempted to remove bearing..but that did not go so good. So now im wondering if i just buy a salvaged ac compressor and switch compressors..did not empty refreg before removing clutch.compressor still attached.Do you have any suggestions?


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Nov 14, 2009, 7:01 PM

Post #2 of 6 (2590 views)
Re: ac compressor replacement Sign In

I would never ateempt using either a used part or a remanufactured part for this. The risk of failure is way too high.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



blm1858
New User

Nov 21, 2009, 1:11 PM

Post #3 of 6 (2571 views)
Re: ac compressor replacement Sign In

Yes I know its not good to use salvage parts but its alot cheeper..I did replace the compressor and that still didnt fix the rattling sound..I finally tucked my tail between my legs and ask a mechanic to listen to it..He sez its the hamonic balancer..Havnt done this job before either. So now im researching this procedure..I have a book on this 89 olds and it suggest I use a big screw driver wedge in the teeth of the back ring gear..well it also states that there is 219 ftlbs of torque on the center bolt of the vibration damper or harmonic balancer.my question is will the teeth on that ring gear hold up to that much torque? Has anyone else done this job?......Thanks for any and all input


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Nov 21, 2009, 1:21 PM

Post #4 of 6 (2569 views)
Re: ac compressor replacement Sign In

It should be easy with HD air tools. It's really just a big pulley and they do use rubber which can separate. Should only be the crankshaft bolt and a puller needed for most all.

Tricks: You can lock the flywheel (ring gear) or see which way engine turns and put a strong socket and flex bar on the bolt if correct. Duh - if not don't try that and if you do position tools out of harm's way. Watch out - a starter motor is stronger than you would think!

T



Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Nov 21, 2009, 1:32 PM

Post #5 of 6 (2563 views)
Re: ac compressor replacement Sign In

Your also going to need a puller and installer to get it on and off the crankshaft.



PS, on your comment about used parts..............

It's only cheaper if you only have to do it once. It's a lot more expensive when you have to do the whole job over.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



(This post was edited by Hammer Time on Nov 21, 2009, 1:33 PM)


blm1858
New User

Nov 21, 2009, 2:01 PM

Post #6 of 6 (2551 views)
Re: ac compressor replacement Sign In

Thanks you guys..Im just trying to get by until I can get back to work..






  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap