Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

starter will not engage


  Email This Post



trinak
New User

May 23, 2010, 5:02 PM

Post #1 of 8 (3142 views)
starter will not engage Sign In

sometimes when i try to start my 1999 windstar the starter will not engage.we have bought a new starter, cleaned and tested all connections, even checked all wires all the way down, and checked fly wheel. we are truly stumped any ideas??


re-tired
Veteran / Moderator
re-tired profile image

May 23, 2010, 8:12 PM

Post #2 of 8 (3122 views)
Re: starter will not engage Sign In

Are you saying it will not spin at all or that its spinning and not engaging the flywheel ? If the latter could be a bad flywheel.


LIFE'S SHORT GO FISH


trinak
New User

May 24, 2010, 8:50 AM

Post #3 of 8 (3117 views)
Re: starter will not engage Sign In

It is spinning just not engaging to turn it over (just grinds) 2 mechanics checked flywheel and nothing is wrong.


chickenhouse
Enthusiast

May 24, 2010, 9:03 AM

Post #4 of 8 (3115 views)
Re: starter will not engage Sign In

Have your 2 mechanics checked the bendix?


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

May 24, 2010, 10:17 AM

Post #5 of 8 (3113 views)
Re: starter will not engage Sign In

You also might want to double check that you even have the right starter. Some have very slight differences and may not have the same reach.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



trinak
New User

May 24, 2010, 8:10 PM

Post #6 of 8 (3098 views)
Re: starter will not engage Sign In

I took the starter back to napa they said starter is good and is definetly the right starter. we are so frustrated !!!


re-tired
Veteran / Moderator
re-tired profile image

May 24, 2010, 10:29 PM

Post #7 of 8 (3094 views)
Re: starter will not engage Sign In

Have your mechanics power up the bendix without the stator . Then you can check pinion depth with a wire gage . Should be pretty straight forword test . let us know the results.


LIFE'S SHORT GO FISH


Sidom
Veteran / Moderator
Sidom profile image

May 24, 2010, 10:50 PM

Post #8 of 8 (3093 views)
Re: starter will not engage Sign In

Been ages since I've seen that..........On Chevys I remember some reman brands actually giving you the gauge with the starter......






  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap