|
|
Guest
Anonymous Poster
timbargerky@windstream.net
Mar 1, 2007, 8:07 PM
Post #1 of 2
(1104 views)
|
have 96 concord ,engine went bad put a 94 intrepid motor in it ran perfect prior to change now in the concord it only runs good at times it acts like the plugs is going dead or its only running on one or two cylenders changed fuel pump fuel rail all censors exhaust plugs and plug wires and computer and coil pack and it still runs bad at times what else can i do to make it run better any advise would be helpful thank you
|
|
| |
|
|
steve01832
Veteran
Mar 2, 2007, 4:47 AM
Post #2 of 2
(1100 views)
|
|
Re: engine advise
|
Sign In
|
|
You will need a scan tool so you can see the sensor voltages and communicate with the PCM. The 96 engine was out of an OBDII compliant vehicle and the 94 was out of an OBDI vehicle. The engine hasn't really changed but the sensors and their wiring has changed a bit. A scan tool with a good data stream will show you sensor values and will let you do tests on the systems. That is probably your best bet. My next question is is the MIL on? (engine light or service engine soon light).
Steve
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 