Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









drive train


Search for (search options)
 



charity
New User

Feb 22, 2015, 10:30 AM

Post #1 of 3 (1253 views)
drive train Sign In

I got in my car and was driving down the road and drivers side front had a good wobble to it. Took car back home jacked it up, I could move the wheel side to side a little so I took tire off but couldn't see anything out of the ordinary going on other than the rotor plate being loose but it tightened up when I put tire back on. car is 2006 Chrysler Seabring with front wheel drive. any thoughts on what problem could be?


Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Feb 22, 2015, 11:06 AM

Post #2 of 3 (1244 views)
Re: drive train Sign In

The rotor is going to be loose on that one when the wheel isn't installed. The rotor isn't pressed onto the hub on that design.

Your going to need someone to move the wheel side to side while you watch to see what is loose. You could have a ball joint, wheel bearing, tie rod(s), and/or lower A arm with too much play.





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.

(This post was edited by Discretesignals on Feb 22, 2015, 11:06 AM)


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Feb 22, 2015, 1:39 PM

Post #3 of 3 (1234 views)
Re: drive train Sign In

I would spin the tires when in the air and look for one with a deformation that doesn't turn straight. Yo may have a tire with a broken steel belt.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







 
 
 






Search for (options) Privacy Sitemap