|
|
Toyota 89 pick-up clutch problem
|
|
|
| |
|
|
Guest
Anonymous Poster
sweetown01@hotmail.com
Jul 14, 2009, 9:24 AM
Post #1 of 9
(3993 views)
|
Toyota 89 pick-up clutch problem
|
Sign In
|
|
my 4x4 toyota pick-up 89 was stored for two years without running
now my clutch stuck at the end
i start my engine when it is engaged in first gear and it run ,i try to push on the clutch or change gear a couple of time and nothing work,the master cylinder is full of oil
all my gear work but i have to shut down the vehicule to engage any gear please help me to fix it
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 14, 2009, 9:31 AM
Post #2 of 9
(3989 views)
|
|
Re: Toyota 89 pick-up clutch problem
|
Sign In
|
|
Is the clutch pedal going to the floor or is it jammed and hard at the top and won't move at all?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Jul 14, 2009, 9:33 AM
Post #3 of 9
(3986 views)
|
|
Re: Toyota 89 pick-up clutch problem
|
Sign In
|
|
After sitting for 2 years, the system may have air in it & need to be bled. If there is oil in the master cylinder, then that is a problem, that system takes brake fluid & any petroleum product will contaminate the system & every rubber piece in it will need to be repaced..........
|
|
| |
|
|
Guest
Anonymous Poster
sweetown01@hotmail.com
Jul 14, 2009, 1:21 PM
Post #4 of 9
(3973 views)
|
|
Re: Toyota 89 pick-up clutch problem
|
Sign In
|
|
1-My master cylinder is full of *brake fluid.Can you tell me how to bled my clutch?
2-My clutch pedal is jammed and hard at the top and wont move at all.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 14, 2009, 1:24 PM
Post #5 of 9
(3969 views)
|
|
Re: Toyota 89 pick-up clutch problem
|
Sign In
|
|
What that means is that your throw out bearing has rusted to the transmission housing and won't slide. You may be able to free it up with a bar through the hole in the bellhousing but it sounds like the transmission is going to have to be removed to clean up the rust mess.
Bleeding is not the problem.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on Jul 14, 2009, 1:25 PM)
|
|
| |
|
|
Guest
Anonymous Poster
sweetown01@hotmail.com
Jul 14, 2009, 1:54 PM
Post #6 of 9
(3962 views)
|
Re: Toyota 89 pick-up clutch problem
|
Sign In
|
|
what is the bellhousing?Is it the part look a like a curling rock located on the same side then the driver seat?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 14, 2009, 8:41 PM
Post #7 of 9
(3957 views)
|
|
Re: Toyota 89 pick-up clutch problem
|
Sign In
|
|
I'm afraid that if you need to ask that question, this isn't something for you to tackle. The bellhousing is the housing between the transmission and the engine that houses the clutch.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Drive Shaft Repair
2006 Toyoto Camry XLE Driver Side Electric Window Trouble
Grounding Cable, 2017 Jeep Renegade Trailhawk
equipment
Howdy
