Suzuki Esteem won't start after EGR Valve Replacement


	Auto Repair Home	SEARCH POSTS	WHO'S ONLINE	LOG IN

Automotive Repair

Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:
  Login
  Sign up here!

Latest Forum Post

Drive Shaft Repair

I have a 2015 Chevy Traverse AWD. The fr...

2006 Toyoto Camry XLE Driver Side Electric Window Trouble

Hello, Looking for a little brain help ...

Tierod end change caused some kind of leak

Hello so I just took my car to the nearb...

2011 Dodge Nitro OBD scanner seems to drain battery in 10-20 minutes

When I bought this car in summer 2023, a...

Grounding Cable, 2017 Jeep Renegade Trailhawk

The Cable that connects my negative batt...

Rough Idle (Found new thing)

Hi everyone. First of all sorry for bad ...

equipment

hey yall. im a first year engineering st...

HELP

I have a 1956 1/2 ton panel truck, 69 35...

Howdy

    Just wanted to s...

ABS/Tractiob/Brake Lights on But No DTCs

Hello all, Recently while driving m...

Suzuki Esteem won't start after EGR Valve Replacement

Sign up here!

Email This Post

Auto Repair Home>> Automotive Repair>> Car Troubleshooting

Guest
Anonymous Poster
greg.burns@yahoo.com

Jan 11, 2009, 1:19 PM

Post #1 of 5 (3014 views)

Suzuki Esteem won't start after EGR Valve Replacement	Sign In

I have a 1999 Suzuki Esteem 1.6L 16 valve. 120,000 miles on it. I was getting the EGR Flow engine error code so I took off the EGR valve cleaned it up a bit and that fixed the problem for a couple of weeks. When the light came back on I replaced the EGR valve with a used one. Now the engine won't start at all with the old EGR valve or the new one. It turns over but won't start. If I spray some quick starter in the air intake it will fire and run for a few seconds but then die. I tried blocking the EGR valve altogether but there is no change. Any ideas?

Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Jan 11, 2009, 5:27 PM

Post #2 of 5 (3004 views)

Re: Suzuki Esteem won't start after EGR Valve Replacement	Sign In

An EGR valve won't keep an engine from starting. Granted, it may not run real good, but should run. Doesn't sound like you are getting fuel to the injectors. Look for disconnected or poorly connected connectors. Can't image how you'd blown a fuse or a relay doing the EGR, but worth a check.
Loren
SW Washington

Guest
Anonymous Poster

Jan 12, 2009, 6:23 PM

Post #3 of 5 (2998 views)

Re: Suzuki Esteem won't start after EGR Valve Replacement	Sign In

Thanks, I don't see any problems with any connectors or hoses - the fuel pump relay does not seem to be the problem. Is there a simple way to tell if the fuel pump is working?

Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Jan 12, 2009, 6:55 PM

Post #4 of 5 (2992 views)

Re: Suzuki Esteem won't start after EGR Valve Replacement	Sign In

Well, the best and safest way would be to connect a fuel pressure guage to the fuel rail. Listen for the fuel pump running when you first turn on the ignition. Being hard of hearing, I'll stick a funnel in the fuel tank opening, hold my ear close, and have someone turn on the key (or have someone with some hearing left to listen).

It'll only run for a few seconds, then shut off.
Loren
SW Washington

Guest
Anonymous Poster
greg.burns@yahoo.com

Jan 13, 2009, 3:41 PM

Post #5 of 5 (2976 views)

Re: Suzuki Esteem won't start after EGR Valve Replacement	Sign In

Update - problem was the fuel pump. I think it will spell the end of the line for this Esteem. Thanks for your help.

Email This Post

Search for (options) Privacy Sitemap