|
|
Craig
Anonymous Poster
celerystick117@hotmail.com
Nov 19, 2007, 11:26 PM
Post #1 of 2
(1464 views)
|
|
Stuck Compression Tester
|
Sign In
|
|
I was running a compression test today, when I ran into a little problem. The compression tester I used had a screw on extender attachment to fit my vehicle (93 ford probe) and when I tried to unscrew the tester from the spark plug after I was done, the attachment remained in the hole.
It seems like a dumb design, and I feel certain that someone has run into this problem before. The attachment has a hex edge but there isn't enough wall clearance to fit a socket. The only thing I have considered doing is using a strong adhesive to glue my compression tester to the attachment, and then unscrew, but I am afraid if the hose breaks off, I have gotten myself into even more trouble.
Like I said, I feel like someone has to have run into this problem again, does anyone have advice for me?
Thanks
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Nov 20, 2007, 12:12 AM
Post #2 of 2
(1461 views)
|
|
Re: Stuck Compression Tester
|
Sign In
|
|
Don't know what you are looking at now but can you get an easy-out in there?
T
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 