|
|
videomann!
User
Jul 25, 2009, 11:34 PM
Post #1 of 12
(4009 views)
|
|
Ignition Control Module
|
Sign In
|
|
Hello All, I have a 91 Olds Cutlass Ciera w/ 2.5 Liter Engine and I need A diagram to show me how to go about removing the Ignition Control Module!! It is in the craziest location under that hood!!! Any help as to how to go about getting that thing off of there would be greatly appreciated!!!! Thanks
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 26, 2009, 12:13 AM
Post #2 of 12
(4005 views)
|
|
Re: Ignition Control Module
|
Sign In
|
|
It's mounted under the coils so you have to remove the coils first. That takes a special 4.5mm socket to get the coils off.
Here are the instructions
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
videomann!
User
Jul 26, 2009, 1:28 AM
Post #3 of 12
(3999 views)
|
|
Re: Ignition Control Module
|
Sign In
|
|
Thx Hammertime, but I tried to get it from under the car as well as above. I know exactly what I'm looking for, but do I have to rock the engine forward to get to this part because that is what it is looking like?! I guess I would like to know how to rock the engine forward to get to this part!! THX A lot for all the info to help me out!!!
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 26, 2009, 2:56 AM
Post #4 of 12
(3997 views)
|
|
Re: Ignition Control Module
|
Sign In
|
|
No, you don't move the engine. You just have to fight to reach it. Welcome to our world........LOL
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
videomann!
User
Jul 26, 2009, 3:02 AM
Post #5 of 12
(3992 views)
|
|
Re: Ignition Control Module
|
Sign In
|
|
Thx for the help Hammer Time... I guess I gotta fight!!!! But they did put that part in a crazy place!!!! I'll figure it out one way or another!!!
|
|
| |
|
|
videomann!
User
Jul 26, 2009, 8:37 AM
Post #6 of 12
(3984 views)
|
Re: Ignition Control Module
|
Sign In
|
|
Hammer Time, in that diagram is #6 the Crankshaft Position Sensor? It wasn't the darn Control Module after all, it tested out perfect @ 2 different autoparts stores!!! Dangit!!! So, now I'm looking into the CPS!! Thx for any help!!! Back to the Drawing Board. That part was a beast to get off!!! 
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 26, 2009, 9:12 AM
Post #7 of 12
(3979 views)
|
|
Re: Ignition Control Module
|
Sign In
|
|
Yes, the CPS is under the Module.
Test to see if you have injector pulse. If you don't have injector pulse or spark, then the crank sensor is likely. If you have injector pulse, forget the crank sensor.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
videomann!
User
Jul 26, 2009, 10:00 AM
Post #8 of 12
(3974 views)
|
|
Re: Ignition Control Module
|
Sign In
|
|
Okay, changed the CPS and the car still isn't starting. It is doing everything except turning all the way over. Now, this car has a carburator. No fuel injection. Where do I check now: I changed the Starter, serp belt, water pump. I have spark, the coils are fine, module fine... Still no start, where to look now? HELPPPPP!!! I'm gonna try the battery next. After that I'm stumped again!!! 
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 26, 2009, 10:21 AM
Post #9 of 12
(3967 views)
|
|
Re: Ignition Control Module
|
Sign In
|
|
You don't have a carburetor. You have throttle body injection. They never made a 2.5 with a carb.
You need to stop throwing parts at the car and start testing. If you have spark, then you never should have changed the module or the crank sensor.
You need to test the fuel pressure and injector pulse before going any further.
You can use a noid light bulb to test the injector pulse.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
videomann!
User
Jul 26, 2009, 10:38 AM
Post #10 of 12
(3962 views)
|
|
Re: Ignition Control Module
|
Sign In
|
|
Thx Hammer Time, alright, not throwing any more parts @ the car. Now, I'm testing everything that can be tested. Will try the noid light... How do you use it? That is new to me? But, I will try these things and let you know how it turned out!!!
Thx
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 26, 2009, 10:42 AM
Post #11 of 12
(3956 views)
|
|
Re: Ignition Control Module
|
Sign In
|
|
You unplug the injector plug at the top of the throttle body and plug the bulb into it and then crank the engine. If the light flashes, everything is working at the injector.
Before you go looking for that, try this. Remove the air cleaner and spray some carb cleaner into the intake while someone tries to start it. If it starts and stalls, then you know you have a fuel problem.
Bad fuel pumps are very common
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on Jul 26, 2009, 10:43 AM)
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Drive Shaft Repair
2006 Toyoto Camry XLE Driver Side Electric Window Trouble
Grounding Cable, 2017 Jeep Renegade Trailhawk
equipment
Howdy
