|
|
Guest
Anonymous Poster
wisernwiser@comcast.net
Feb 4, 2007, 7:50 AM
Post #1 of 6
(3171 views)
|
Heater fan switch
|
Sign In
|
|
2003 Jeep Liberty Sport. My Heater fan switch will only work on the high setting. No lower speeds will work. How can I fix this myself with out a service call to my dealer and a large bill ?
|
|
| |
|
|
Guest
Anonymous Poster
harleydadcar@yahoo.com
Feb 4, 2007, 11:50 AM
Post #2 of 6
(3167 views)
|
|
Re: Heater fan switch
|
Sign In
|
|
blower motor resistor try replacing that
|
|
| |
|
|
carminejg3
User
Feb 6, 2007, 9:00 AM
Post #3 of 6
(3157 views)
|
|
Re: Heater fan switch
|
Sign In
|
|
I have the same issue in my car... well I did. The blower would only work on high speed, but recently the blower stopped working and once in a while if you hit a nice size bump, the blower kicks in but then shorty doesn't work. I've been searching for a heater relay switch, but will give changing the resister a shot first.
|
|
| |
|
|
tut2261
User
Feb 7, 2007, 12:53 AM
Post #4 of 6
(3152 views)
|
|
Re: Heater fan switch
|
Sign In
|
|
If it only works in the highest setting the resistance coils in the blower motor resistor have failed. The highest setting still runs through the resistor, but is isolated on it's own circuit.
If the Blower is working intermitantly, it could be the motor. A loose connection or burnt wires would be a good prelem inspection. However the resistor would be a cheap guess.
|
|
| |
|
|
carminejg3
User
Feb 7, 2007, 8:42 AM
Post #5 of 6
(3147 views)
|
|
Re: Heater fan switch
|
Sign In
|
|
Thanks, Tut2261.
Mine actually ran for about 2-3 years on high only. Then recently went caput altogether. Now every once in a while yo hear it trying to kick back on, but no go. So like you mentioned I'm going to try out the resistor first since its under $40 and a blower could be a few hundred, but first I'll open up the unit and make sure the resistor is plugged in could just be a loose connection...but thats doubtful. I'm just hoping that the resistor went totally and thats why it doesn't work.
Do I have to discharge the resistor first or does it most likly drop the charge?
|
|
| |
|
|
tut2261
User
Feb 7, 2007, 4:57 PM
Post #6 of 6
(3143 views)
|
|
Re: Heater fan switch
|
Sign In
|
|
There is not charge on the resistor, Just unplug and plug in the new one. Just be sure the key is off while you working on the wiring to insure you do not ground out a power wire.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
mdma pills for sale : WhatsApp +33758633852
Drive Shaft Repair
2006 Toyoto Camry XLE Driver Side Electric Window Trouble
equipment
