Main IndexAuto Repair Home Search Posts SEARCH
Who's Online WHO'S
Log in LOG

99 Honda Accord EX V6 Cranks but won't start

car parts image

  Email This Post

New User

Jun 8, 2012, 3:06 PM

Post #1 of 2 (2741 views)
99 Honda Accord EX V6 Cranks but won't start Sign In

I have had this problem with this car for about 2 months now. The car would sometimes crank but not start. However this time I haven't been able to get it started in a few days. It cranks strong and sounds good but doesnt start up. I checked the air filter and it was ok. It has a full tank of gas. The serpentine belt turns when cranking.. What else can I possibly do to find out and or fix the issue?
Thanks in advance

Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jun 8, 2012, 3:07 PM

Post #2 of 2 (2738 views)
Re: 99 Honda Accord EX V6 Cranks but won't start Sign In

  All "crank, no start" conditions are approached in the same way. Every engine requires certain functions to be able to run. Some of these functions rely on specific components to work and some components are part of more than one function so it is important to see the whole picture to be able to conclude anything about what may have failed. Also, these functions can ONLY be tested during the failure. Any other time and they will simply test good because the problem isn't present at the moment.
If you approach this in any other way, you are merely guessing and that only serves to replace unnecessary parts and wastes money.

Every engine requires spark, fuel and compression to run. That's what we have to look for.

These are the basics that need to be tested and will give us the info required to isolate a cause.

1) Test for spark at the plug end of the wire using a spark tester. If none found, check for power supply on the + terminal of the coil with the key on.

2) Test for injector pulse using a small bulb called a noid light. If none found, check for power supply at one side of the injector with the key on.

3) Use a fuel pressure gauge to test for correct fuel pressure, also noticing if the pressure holds when key is shut off.

4) If all of these things check good, then you would need to do a complete compression test.

Once you have determined which of these functions has dropped out,
you will know which system is having the problem.


We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.

  Email This Post

Feed Button

Search for (options) Privacy Sitemap

site analytics