|
|
pickrng
New User
May 24, 2005, 8:53 AM
Post #1 of 6
(3091 views)
|
How do you take out a drivers side window on a 99 blazer, I have another door that I need to put this window in.
|
|
| |
|
|
carjunky
Enthusiast
May 24, 2005, 9:05 AM
Post #2 of 6
(3088 views)
|
|
Re: 99 Chevy Blazer
|
Sign In
|
|
Have you tried taking off the door panels?
Then you would need to disassemble the connections on the window this way you could side the window up and out of the door.
|
|
| |
|
|
pickrng
New User
May 24, 2005, 10:02 AM
Post #3 of 6
(3086 views)
|
|
Re: 99 Chevy Blazer
|
Sign In
|
|
I have the door panels off, what connections are you refering to?
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
May 24, 2005, 10:08 AM
Post #4 of 6
(3086 views)
|
|
Re: 99 Chevy Blazer
|
Sign In
|
|
Get the used window out first. They tilt and come out - same way for going in - then secure an set straight. Vacuum out any broken glass as it plugs drain holes. Good Luck,
|
|
| |
|
|
carjunky
Enthusiast
May 24, 2005, 10:49 AM
Post #5 of 6
(3084 views)
|
|
Re: 99 Chevy Blazer
|
Sign In
|
|
Does the window itself have anything that is attached... such as metal clips or plastic connections...which connect the window to the door, so that it may be rolled up or down? If so these assembles, should let the window go so you could take it out.
Otherwise as Tom mentioned it should side right out if it's just seated in the door.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
May 24, 2005, 4:58 PM
Post #6 of 6
(3077 views)
|
|
Re: 99 Chevy Blazer
|
Sign In
|
|
To add - the glass itself should only have a couple connection to the door. Put window down even is old one is mising for installation and up when new one in place, or closer to full up. Sometimes you have to move it up and down to get at the fasteners, Good luck,
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
