Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

94 integra cant find the noise coming from?


  Email This Post



cooldude
User
cooldude profile image

Aug 2, 2008, 4:49 PM

Post #1 of 11 (1783 views)
94 integra cant find the noise coming from? Sign In

hi new bee here..

ok i have a 94 integra i hear like a clang noise when i drive its coming from the back on my right side..i check the nuts if they were all tight check the calipers/break pads/disc and everything seems to be snug and tight..

when i drive in a smooth flat road i dont hear anything, but when i hit little bumps i hear it like clan clan clan...what could be making that noise?
my shocks?

thanksSmile


(This post was edited by cooldude on Aug 2, 2008, 6:00 PM)


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Aug 2, 2008, 6:39 PM

Post #2 of 11 (1776 views)
Re: 94 integra cant find the noise coming from? Sign In

Hard to say of couse without being there but any brake or suspension part could be involved.

Does it shut right up if you drag the brake a little? That's telling that it's brake related.

There could be stabilizer bar pin bushings broken, even heat shield or exhaust mounts of any kind can make noises - tap on exhaust with a rubber hammer may reveal that. Noises are warnings so keep checking till you find it,

T



cooldude
User
cooldude profile image

Aug 2, 2008, 7:20 PM

Post #3 of 11 (1774 views)
Re: 94 integra cant find the noise coming from? Sign In

thanks for the info..

i did tap it with a rubber hammer its not exhaust pipes or anything..when i break it does not make the noise so i know its not break..

it sounds like a lose bolt clan claning ..but i re tight all bolts and check too.. to me i think it could be the shock absorber because when i hit the little bumps thats when it makes the noise but im not sure if its that..is that a sing of a bad shock worn out? this really got me stumpCrazy and i know its coming from the back of the car i can hear it..

thanksWink


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Aug 2, 2008, 7:59 PM

Post #4 of 11 (1769 views)
Re: 94 integra cant find the noise coming from? Sign In

Just sitting still bounce the car up and down and see if it will make the noise. If so - try to look for something while a helper bounces it keeping your head out from under it pleaseMad

If you can find a road where it will actively make the noise and braking shuts it up the brakes are the likely problem! While braking the parts are tight with force and can't rattle so much so that's a clue to totally check them out and not a bad idea anyway,

T



cooldude
User
cooldude profile image

Aug 2, 2008, 8:14 PM

Post #5 of 11 (1767 views)
Re: 94 integra cant find the noise coming from? Sign In

great idea ill do that jump around thing tommorow..

as for the breaks your talking about heres what i did and im sure/think its most like its not the breaks..
i drove on a smooth road break soft/hard no noise ...drove on a bumpy road no breaking noise appears ..
drove on bumpy road hit the breaks makes noise same loudness when breaking it didnt make a louder noise same as if i drove on a bumpy road without breaks.. i took my exhaust off still makes the noise..

thanks very much... i like your catSmile


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Aug 2, 2008, 8:53 PM

Post #6 of 11 (1764 views)
Re: 94 integra cant find the noise coming from? Sign In


Kitty likes you too! She's good at finding noises under the carCrazy!

T



Guest
Anonymous Poster

Aug 3, 2008, 9:34 AM

Post #7 of 11 (1753 views)
Re: 94 integra cant find the noise coming from? Sign In

i think im going to need your cats help..lol

ok i did jump on it and i dont hear that noise all i hear is like a rubber mount kind of squeeking but not loud is not the clang noise as if i was driving so i think its not the shocks and the shock rebounds nice and smooth has to be something else..?

well back to jacking it up...

kitty can you pass me the ranch..lol

thanks lots


cooldude
User
cooldude profile image

Aug 3, 2008, 9:43 AM

Post #8 of 11 (1750 views)
Re: 94 integra cant find the noise coming from? Sign In


In Reply To
i think im going to need your cats help..lol

ok i did jump on it and i dont hear that noise all i hear is like a rubber mount kind of squeeking but not loud is not the clang noise as if i was driving so i think its not the shocks and the shock rebounds nice and smooth has to be something else..?

well back to jacking it up...

kitty can you pass me the ranch..lol

thanks lots

^^oops thats me..i tot i was logged on..thats cool you can post even thoe your not log on..

thanks



Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Aug 3, 2008, 10:06 AM

Post #9 of 11 (1748 views)
Re: 94 integra cant find the noise coming from? Sign In

Keep looking. Rock it side to side and eventually you may need to get under it while wheels are still supporting the weight of the vehicle on lifts that do that or bite the bullet and take it in - alignment shops should be good at this,

T



Guest
Anonymous Poster

Aug 16, 2008, 9:18 AM

Post #10 of 11 (1714 views)
Re: 94 integra cant find the noise coming from? Sign In

Might sound retarded, but I'm a truck driver and deal with clang-clang noises that can come from just about any where. Do you have a jack and spare in your car? and are they secured tightly? Nothing rattles UNDER or ON your car, but what about IN? If the jack is laying on top your rim (spare tire) it will for a fact clang and jump around on speed bumps, gravel roads, ANY uneven surface. I carried free weights with me, had to strap them down, etc. Just check in trunk for anything loose or free.... tools, wrenches, dunno. Maybe I'm retarded, maybe it's old common horse sense, though. Hope you solve your problem!!Wink


cooldude
User
cooldude profile image

Aug 16, 2008, 1:53 PM

Post #11 of 11 (1701 views)
Re: 94 integra cant find the noise coming from? Sign In

i took it to the shop today and it was a worn bushing the center part which had like a metal long pin to blot on to was hitting the sides..im not sure whats that called..but yeah that was the case..

but yeah thanks everyone for helping me outWink






  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap