|
|
'93 chrysler concorde fuel filter change
|
|
|
| |
|
|
Guest
Anonymous Poster
runner4139@gmail.com
Sep 24, 2008, 10:10 PM
Post #1 of 2
(3555 views)
|
'93 chrysler concorde fuel filter change
|
Sign In
|
|
anyone know how to change a fuel filter on a '93 chrysler concorde?
any advice would be appreciated, on one end the connection won't come off. other end is free, though.
|
|
| |
|
|
DanD
Veteran
/ Moderator
Sep 25, 2008, 4:10 AM
Post #2 of 2
(3551 views)
|
|
Re: '93 chrysler concorde fuel filter change
|
Sign In
|
|
Below is an example of one type of fuel filter quick-connect, disconnect tool.
You would open up the tool enough to get it around the line; then slide the narrow end of the tool inside the quick connector. This should release the tangs inside the connector, allowing the connector to slide off of the filter.
But because of the age of this vehicle; the filter and quick connector might be seized together; if this is the case, then you will likely have to cut the line.
There are line repair kits available that will make putting the connector back on much easier.
If you do have to cut the line and are thinking that you’ll just use rubber fuel line to connect everything back together; make sure you use hose that is designed to handle the pressure the fuel pump can produce.
Regulated pressure can reach 55-60psi and I was surprised at this, after looking up the spec for maximum pressure; these pumps can produce is as high as 135psi. Regular everyday fuel line would blow up, like a balloon.
Dan.
Canadian "EH"
|
|
| |
|
| | |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 