|
|
camaro z28
Anonymous Poster
mg_wrestler08@hotmail.com
Oct 4, 2007, 9:17 PM
Post #1 of 2
(2708 views)
|
87 camaro iroc
|
Sign In
|
|
ok... i have a 87 Camaro with a 350 i have 2 raidiator hoses with holes in them one seems to be a high pressure hose and i cant figure out how but it is leaking like a water bed with holes and i cant get the hose out any advice would be great...
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Oct 4, 2007, 10:06 PM
Post #2 of 2
(2704 views)
|
|
Re: 87 camaro iroc
|
Sign In
|
|
There are upper and lower Rad hoses - the two largest in the cooling system that should easily be available as new pre-moulded hoses. Take care at radiator ends as they can be damaged removing them if you just pull. If stuck, loosen the clamp as much as you can or remove it completely is best and if needed use like an exacto knife to cut old hose and peel it away. Many lower hoses require a spring and you use the old one as some parts are too cheap to give you a new one and you can fish it in there. It's not high and low pressure but rather "to" radiator and "return" to engine or commonly called upper and lower hoses,
T
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG