|
|
2007 toyota tocoma clutch issues
|
|
|
| |
|
|
mik05
User
Jul 14, 2013, 9:04 AM
Post #1 of 6
(1589 views)
|
|
2007 toyota tocoma clutch issues
|
Sign In
|
|
I have an 07 tocoma the truck does not seem to catch a gear till the pedal is almost all the way up, I know of some types of vehicles that are supposed to be like this but is my truck? I just don't know how to tell if the clutch is going bad or if it needs to be bled are adjusted. Please help
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jul 14, 2013, 9:44 AM
Post #2 of 6
(1580 views)
|
|
Re: 2007 toyota tocoma clutch issues
|
Sign In
|
|
More than likely the clutch disc lining is worn out.
Your truck uses hydraulics, so if there was a hydraulic issue, you would have spongy pedal or the clutch wouldn't disengage all the way causing it hard to get into gears. The freeplay from clutch lining wear is taken up by the hydraulic system.
When the disc is worn out the master cylinder fluid will be low, if it is was never topped off or leaking, and the pedal engagement will be high.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Jul 14, 2013, 9:46 AM)
|
|
| |
|
|
mik05
User
Jul 25, 2013, 1:12 PM
Post #3 of 6
(1527 views)
|
|
Re: 2007 toyota tocoma clutch issues
|
Sign In
|
|
I have contacted the previous owner whom stated to me that the fly wheel was scratched before he bought the truck but, and I know that it was not smart so no need to insult the guy, he has drove the truck for 5 years like it is although he has babied it! I'm a little short on cash so I have no choice but to do likewise in the immediate future but I am saving money to replace the clutch package. Just trying to see if in the meantime the clutch which doesn't seem to release until my foot is almost completely off the pedal can be adjusted or if adjusting the pedal itself can give me any more clutch than I have now. I know some of the older hydraulic clutches can be bled or adjusted but I don't really now about the newer ones. Please help!!!
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 25, 2013, 1:37 PM
Post #4 of 6
(1526 views)
|
|
Re: 2007 toyota tocoma clutch issues
|
Sign In
|
|
Hydraulic clutches cannot be adjusted.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
mik05
User
Jul 25, 2013, 2:06 PM
Post #5 of 6
(1523 views)
|
|
Re: 2007 toyota tocoma clutch issues
|
Sign In
|
|
How can you tell if it needs to be bled? Even though people say it can't be adjusted I do know that when my jeep with a hydraulic clutch messed up and didn't have much pedal at all i bled it and it gave more then 50% of the clutch back
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 25, 2013, 2:33 PM
Post #6 of 6
(1518 views)
|
|
Re: 2007 toyota tocoma clutch issues
|
Sign In
|
|
Bleeding is a different thing. If it has air in the system and will have way too much free play at the top. If your clutch is catching at the very top, that's definitely not a bleeding problem. Don't try to bleed it if it doesn't need it because you will likely put air into the system instead.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
2006 Toyoto Camry XLE Driver Side Electric Window Trouble
Tierod end change caused some kind of leak
Grounding Cable, 2017 Jeep Renegade Trailhawk
equipment
Howdy
