Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

2004 Jeep Wrangler wont turn over


  Email This Post



68sporty
New User

Aug 9, 2012, 7:29 PM

Post #1 of 7 (3118 views)
2004 Jeep Wrangler wont turn over Sign In

Was driving home from work. Stopped at store, came out turned key and one loud click and car doesn't turn over. Tow truck driver thought it was starter, so did I. Called mechanic and he agreed it was the starter. Bought and installed and same thing, one loud click and doesn't turn over. I tried to turn it several times and one click every time. When I had someone try to start it I put my hand on the starter and felt it and could feel the solenoid kinda thud when the click noise happened. It's not several clicks like when the battery is low. Please help, have to go to work in morning. Thank You.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Aug 9, 2012, 7:38 PM

Post #2 of 7 (3111 views)
Re: 2004 Jeep Wrangler wont turn over Sign In

Put a socket on the crankshaft bolt and see if you can turn the motor by hand.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



68sporty
New User

Aug 9, 2012, 7:48 PM

Post #3 of 7 (3098 views)
Re: 2004 Jeep Wrangler wont turn over Sign In

I grabbed the serpentine belt and was able to turn the bottom crank shaft back and forth. Just cant keep turning in circles I guess cause of compression?


68sporty
New User

Aug 9, 2012, 8:20 PM

Post #4 of 7 (3086 views)
Re: 2004 Jeep Wrangler wont turn over Sign In

I took your advise and turned the motor completely over a few times with a socket/wrench.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Aug 10, 2012, 2:56 AM

Post #5 of 7 (3065 views)
Re: 2004 Jeep Wrangler wont turn over Sign In

OK, that means the issue is electrical. If the starter is engaging, that means the trigger circuit is working and it has to be a lot voltage issue. Have the battery and all the cable connections tested.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



DIYfrvr
User

Aug 10, 2012, 8:00 AM

Post #6 of 7 (3055 views)
Re: 2004 Jeep Wrangler wont turn over Sign In

Is the CEL on? (Check engine light)

Had an issue quite recently where the CPS (crankshaft position sensor) was busted and the symptoms were same as yours. There was a CEL for the CPS making my diagnosis quite easy - hope you get it resolved quickly. Good luck


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Aug 10, 2012, 8:22 AM

Post #7 of 7 (3053 views)
Re: 2004 Jeep Wrangler wont turn over Sign In

Stop with the nonsense. The car doesn't even crank.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap