Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

2002 Honda Odyssey Stud replacement


  Email This Post



fsmod6363
Anonymous Poster
shon.modarelli@dexknows.com

Jan 31, 2009, 10:48 AM

Post #1 of 3 (4561 views)
post icon 2002 Honda Odyssey Stud replacement Sign In

I need to replace the studs in the front wheel 2002 Honda Odyssey. They can't go straight in from the back due to the angle. I need to take the hub off, have removed the nut, but the hub still won't pull off. What now?


Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Jan 31, 2009, 11:06 AM

Post #2 of 3 (4557 views)
Re: 2002 Honda Odyssey Stud replacement Sign In

You'll need to remove the steering knuckle/hub assy as a unit. The hub is pressed into the bearing/knuckle assy.
If the bearing/hub has to be removed from the knuckle (am pretty sure it will) it requires a press to remove and install.
Couldn't find a pic of the exact application, but this is a general idea of how it's set up.
Loren
SW Washington

(This post was edited by Loren Champlain Sr on Jan 31, 2009, 11:11 AM)


zmame
Veteran / Moderator
zmame profile image

Jan 31, 2009, 11:10 AM

Post #3 of 3 (4556 views)
Re: 2002 Honda Odyssey Stud replacement Sign In

There should be three bolts on the back. Thats what holds the hub/bearing assembly in the knuckle remove those, now since your not replacing the bearing i don't recommend hitting it with a hammer to remove it, if you can get a hold of a air chisle you can hit the base of the bearing to get it to move then pull it off.. might be on there pretty good.. option b you can take the whole stearing knuckle off and take it to a shop where they can press it out.. probably best since it's the origanol bearing (more then likley) and take some effort to move it.



beat me to the punch hehe


(This post was edited by zmame on Jan 31, 2009, 11:13 AM)






  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap