I had a check engine light. had it scanned and came up with a evap emission coed. had the code cleared and now I don't have any wipers cruse control odomater dash warning light and the 4x4 buttons don't work. it starts and runs fine. when I first unlock and get in the sercurity light blinks. when I turn key on the only lights to come on in the dash are the seat belt and check engine no security. when it is running the tach and speed o work as well as oil pressure gauge. the fuel and temp dont work the cruse dont work as well. any help would be appreciated

I doubt this had anything to do with your scan or the code found. It sounds like a failure of the dash cluster but it will require some testing with a Tech2 scan tool to diagnose it properly.




78 Corvette Pace Car For Sale-18k mi orig-Florida

Thanks hammer time. would the cluster also make the wipers and cruse control not work also the blower moter for the heat. the radio was out but it came back on . I was thinking it may have something to do with the passlock system. I also am having trouble with the remote start stoped working be for any of this other stuff. so I removed control box and sent it in for repair. It acts like it is started with thr remote with nothing else working. thanks for your help


(This post was edited by apple2582 on Oct 25, 2009, 10:49 AM)

Passlock has no control over those things but the ignition switch does so that needs to be checked before going to far. The dash cluster will effect the Passlock system though, as will the ignition switch.




78 Corvette Pace Car For Sale-18k mi orig-Florida