|
|
2000 Grand prixL Please Help!!!
|
|
|
| |
|
|
dwc1435
Novice
Aug 12, 2010, 9:30 AM
Post #1 of 10
(2003 views)
|
|
2000 Grand prixL Please Help!!!
|
Sign In
|
|
Hi guys, i have a 2000 grand prix se, 3.1 motor.i had a strut problem. I had replaced the strut bearing in the top because the coil was popping. the car was steering fine both ways before that. i took the car around the block 2 mins after doing that bearing, and now for some reason, turning the car towards the drivers side, it buckles up and gets hard. no one knows what it is. People are telling me its the rack. Im just looking for an opinion. another thing is when i jack up the side we worked on and relive the pressure, it steers easy again. Im confused. Any help would be good.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 12, 2010, 9:57 AM
Post #2 of 10
(1997 views)
|
|
Re: 2000 Grand prixL Please Help!!!
|
Sign In
|
|
I'm not there to inspect it but everything is pointing to that strut you worked on. The problem has to be something you did when changing that. It may be missing a spacer or something like that.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
dwc1435
Novice
Aug 12, 2010, 10:17 AM
Post #3 of 10
(1993 views)
|
|
Re: 2000 Grand prixL Please Help!!!
|
Sign In
|
|
Ya i know, everyone is telling me the rack is bad but i dont think so. we didnt undo anything, so i don't know if alignment is off. because when we put in the strut, we had to turn the strut to get it to be strait.
|
|
| |
|
|
dwc1435
Novice
Aug 12, 2010, 1:32 PM
Post #4 of 10
(1986 views)
|
|
Re: 2000 Grand prixL Please Help!!!
|
Sign In
|
|
just want to ask also, if a bad cv joint would cause this.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 12, 2010, 1:35 PM
Post #5 of 10
(1983 views)
|
|
Re: 2000 Grand prixL Please Help!!!
|
Sign In
|
|
No, it won't.
This is not a big mystery. You didn't have a strut noise, you worked on the turn plate. Now you have a strut noise. Something is messed up in the strut plate
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
dwc1435
Novice
Aug 12, 2010, 1:43 PM
Post #6 of 10
(1980 views)
|
|
Re: 2000 Grand prixL Please Help!!!
|
Sign In
|
|
But we dont have STRUT noise. we cant turn the car to the left. we originally replaced the passenger side turn plate cause i had coil sound. i replace it and there is no noise at all. It just wont turn to the opposite side. now.
|
|
| |
|
|
dwc1435
Novice
Aug 12, 2010, 1:54 PM
Post #8 of 10
(1974 views)
|
|
Re: 2000 Grand prixL Please Help!!!
|
Sign In
|
|
that is what we thought. the strut. but we went and got another 2 struts with bearings on both and replaced them both. and it still does it. and that was this morning, we replaced them. like i said its confusing.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 12, 2010, 2:27 PM
Post #9 of 10
(1970 views)
|
|
Re: 2000 Grand prixL Please Help!!!
|
Sign In
|
|
Are your tie rods hitting anything as they travel?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
dwc1435
Novice
Aug 12, 2010, 2:44 PM
Post #10 of 10
(1966 views)
|
|
Re: 2000 Grand prixL Please Help!!!
|
Sign In
|
|
well the one on the drivers side is brand new. One thing i thought is questionable. the lower control arm on that passenger side, has some play in it a little. but the control arm on the drivers side is like frozen. their is no play in it at all.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Drive Shaft Repair
2006 Toyoto Camry XLE Driver Side Electric Window Trouble
Grounding Cable, 2017 Jeep Renegade Trailhawk
equipment
Howdy
