|
|
cpscan
New User
Apr 9, 2008, 3:52 PM
Post #1 of 10
(8780 views)
|
|
1996 Nissan Altima
|
Sign In
|
|
What is the procedure for replacing the starter on a 1996 Altima 4cyl 5spd Manual trans. Do I need any special tools? Are there any little secrets?
|
|
| |
|
|
Guest
Anonymous Poster
Apr 9, 2008, 4:09 PM
Post #2 of 10
(8772 views)
|
|
Re: 1996 Nissan Altima
|
Sign In
|
|
Psssttt, pppsssttt, c'mere.
I got a secret, I don't know what I am talking about. I just post useless things that have no bearing on anything that is here.
(This post was edited by way2old on Apr 9, 2008, 5:09 PM)
|
|
| |
|
|
way2old
Veteran
/ Moderator
Apr 9, 2008, 5:07 PM
Post #3 of 10
(8767 views)
|
|
Re: 1996 Nissan Altima
|
Sign In
|
|
Hey guest. I got a secret too. Your post has been changed. You are about to win an all expense paid vacation.
Being way2old is why I need help from younger minds
(This post was edited by way2old on Apr 9, 2008, 5:10 PM)
|
|
| |
|
|
Guest
Anonymous Poster
Apr 9, 2008, 5:18 PM
Post #4 of 10
(8764 views)
|
|
Re: 1996 Nissan Altima
|
Sign In
|
|
Psst - you're way too old!
ha ha ha
|
|
| |
|
|
way2old
Veteran
/ Moderator
Apr 9, 2008, 5:20 PM
Post #5 of 10
(8761 views)
|
|
Re: 1996 Nissan Altima
|
Sign In
|
|
Welcome to Ban Land.
Being way2old is why I need help from younger minds
|
|
| |
|
|
Guest
Anonymous Poster
Apr 9, 2008, 5:28 PM
Post #6 of 10
(8758 views)
|
|
Re: 1996 Nissan Altima
|
Sign In
|
|
Not Allowed.......
T
(This post was edited by Tom Greenleaf on Apr 9, 2008, 8:33 PM)
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Apr 9, 2008, 8:51 PM
Post #7 of 10
(8734 views)
|
|
Re: 1996 Nissan Altima
|
Sign In
|
|
cpscan: Sorry for the confusion with this. Any forum can get unwanted posts and it's rare here and we will try to keep it that way.
Back to starter motor replacement. There aren't any real oddities I know of with this car. It is important to disconnect battery and a VERY good idea to use a "memory saver" used in a power port to saved stored info the car has. Don't open doors and disconnect any hood light with the simple memory saver. Seems this one drops down out the bottom which isn't unusual. Scope out what might be in the way.
Good luck with the fix,
T
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Apr 9, 2008, 8:54 PM
Post #8 of 10
(8733 views)
|
|
Re: 1996 Nissan Altima
|
Sign In
|
|
cpscan: This may help....
T
Altima
See Figures 1, 2 and 3
0900823d801b5c14","gif_medium","no")"
Fig. 1: The starter is located to the left of the oil filter housing on the engine block
0900823d801b5c15","gif_medium","no")"
Fig. 2: The starter motor is removed from the bottom side of the engine compartment
0900823d801b5c16","gif_medium","no")"
Fig. 3: When installing, be sure to align the starter's mounting bolt holes with those in the engine block
-
Disconnect the negative battery cable. -
Raise and support the vehicle safely. -
Remove the starter support bracket, as required. -
Label and disconnect the starter electrical harness. -
Support the starter from beneath the vehicle using a jackstand. -
Remove the starter mounting bolts. -
Carefully lower the starter from the vehicle.
To install: -
Position the starter on the engine and support it using a jackstand. -
Install the starter mounting bolts and tighten to 30-37 ft. lbs. (40-50 Nm). -
Connect the starter electrical harness. -
Install the starter support bracket, as required. -
Lower the vehicle. -
Connect the negative battery cable.
|
|
| |
|
|
PJ
Anonymous Poster
tweeterman@shaw.ca
May 5, 2008, 10:36 PM
Post #9 of 10
(8672 views)
|
|
Re: 1996 Nissan Altima
|
Sign In
|
|
Hi,
Does this also apply to a 1993 4-cyl GXE ?
Thanks
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
mdma pills for sale : WhatsApp +33758633852
Drive Shaft Repair
2006 Toyoto Camry XLE Driver Side Electric Window Trouble
Grounding Cable, 2017 Jeep Renegade Trailhawk
equipment
