|
|
1996 Ford Taurus radio and power steering cut out simultaneously while driving
|
|
|
| |
|
kenneth822
New User
Jan 30, 2013, 12:17 AM
Post #1 of 3
(3469 views)
|
1996 Ford Taurus radio and power steering cut out simultaneously while driving
|
Sign In
|
|
96 Taurus -radio and power steering w cut out (both together )while driving-both w resume working when i put in park--replaced alternator-replaced tensioner pulley and belt--could it be a vacuum hose or electrical
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jan 30, 2013, 5:57 AM
Post #2 of 3
(3427 views)
|
Re: 1996 Ford Taurus radio and power steering cut out simultaneously while driving
|
Sign In
|
|
Article No. 96-25-5 12/02/96 ^ STEERING - CONTINUOUS REDUCTION IN POWER STEERING ASSIST WHEN SHIFTING INTO "REVERSE" OR "DRIVE" - VEHICLES WITH 3.0L ENGINE ^ STEERING - INTERMITTENT REDUCTION IN POWER STEERING ASSIST - VEHICLES WITH 3.0L ENGINE BUILT THROUGH 5/13/96 FORD: 1996 TAURUS LINCOLN-MERCURY: 1996 SABLE This TSB article is being republished in its entirety to revise the Service Procedure. ISSUE: There may be intermittent reduction in power steering assist during braking from 80 km/h (50 mph) on some vehicles. For this concern, the resolution may be a revision to the Generic Electronic Module (GEM) calibration. On some other vehicles, there may be a continuous reduction in power steering assist when shifting into "Reverse" or "Drive." The customer may have noticed a loss of radio sound, power window and lock functions. For this 3.0L concern, the cause may be internal shorting of the Transmission Range (TR) sensor. ACTION: ^ For those vehicles with intermittent reduction in power steering assist, refer to the following Service Procedure, Step 3. ^ For those 3.0L vehicles with continuous reduction in power steering assist when shifting into "Reverse" or "Drive," replace the TR sensor. Refer to the following Service Procedure for details. SERVICE PROCEDURE 1. Perform normal diagnostics for high steering efforts found in Section 11 of the 1996 Taurus/Sable Service Manual. 2. For a continuous reduction in power steering assist concern on 3.0L engines when the transmission is shifted into "Reverse" or "Drive," disconnect the harness connection from the TR sensor and retest. If the steering functions correctly, replace the TR sensor (-7F293-). 3. Perform diagnostics for the GEM, refer to the 1996 Taurus/Sable Service Manual, Section 18-04. Observe any codes that have been logged by the GEM. If no codes have been logged, and communication with the GEM functions properly, then replace the GEM with a revised GEM (-14B205-) which has a calibration adjustment. Refer to the 1996 Taurus/Sable Service Manual, Section 13 for replacement details. PART NUMBER PART NAME F7DZ-14B205-AB Generic Electronic Module (GEM) F7DZ-14B2O5-BB GEM (Gulf coast country vehicles) F5DZ-7F293-AA Transmission Range (TR) Sensor (8-Pin connector) F6DZ-7F293-A Transmission Range (TR) Sensor (12-Pin connector) OTHER APPLICABLE ARTICLES: NONE SUPERSEDES: 96-20-2 WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage OPERATION DESCRIPTION TIME 962505A Replace Generic Electronic 0.4 Hr. Module (GEM) 962505B Replace Transmission 0.2 Hr. Range (TR) Sensor DEALER CODING CONDITION BASIC PART NO. CODE 14B205 42 OASIS CODES: 102000, 112000, 207000, 303000, 501000, 503000 Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
kenneth822
New User
Feb 1, 2013, 8:59 AM
Post #3 of 3
(3369 views)
|
Re: 1996 Ford Taurus radio and power steering cut out simultaneously while driving
|
Sign In
|
|
thanks...symptoms have stopped ....if they reoccur, i will definitely check out the parts you mentioned and let u know the results
|
|
| |
|