Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









1991 ford aeostar


Search for (search options)
 



speedlod
New User

Nov 2, 2006, 4:10 PM

Post #1 of 5 (1129 views)
1991 ford aeostar Sign In

need to remove igintion switch without key.Have drilled pin out but switch moves no more then 1/4 of inch.Any ideas.


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Nov 2, 2006, 8:30 PM

Post #2 of 5 (1123 views)
Re: 1991 ford aeostar Sign In

Do you mean the lock cylinder or the ignition switch. Two different things, They lock cylinder should come out after a dig into steering column with no need to break or drill anything, T



speedlod
New User

Nov 3, 2006, 12:15 AM

Post #3 of 5 (1121 views)
Re: 1991 ford aeostar Sign In

cylinder lock,easy if have key then just turn to run posisition depress pin and pull.But without total differant story.Was hoping someone had been thru this.


Guest
Anonymous Poster

Dec 1, 2007, 2:52 AM

Post #4 of 5 (1076 views)
Re: 1991 ford aeostar Sign In


In Reply To
need to remove igintion switch without key.Have drilled pin out but switch moves no more then 1/4 of inch.Any ideas.



way2old
Veteran / Moderator
way2old profile image

Dec 1, 2007, 9:26 AM

Post #5 of 5 (1073 views)
Re: 1991 ford aeostar Sign In

If you have the lock pin drilled out, use a small slide hammer to remove the cylinder. If you dont have access to that, screw a long screw into the key slot and lock a pair of vice grips to the head of screw. Use a hammer to hit locking pliers to remove the cylinder. Hit real close to the screw head.



Being way2old is why I need help from younger minds






 
 
 






Search for (options) Privacy Sitemap