|
|
1982 Ford F-150 Turn signals not working
|
|
|
| |
|
PapaHoser
New User
Jan 1, 2013, 10:47 PM
Post #1 of 2
(3063 views)
|
1982 Ford F-150 Turn signals not working
|
Sign In
|
|
I recently purchased a 1982 Ford F-150 Pick-up, I believe the engine size is 305 cu. in., the engine was installed about 4 years ago and has approx. 60,000 miles on it. I was told when I purchased the truck that the turn signals did not work, however the emergency flashers do work. In the last 30 to 45 days I've installed a new battery, new voltage reg., new starter and new starter relay, new coil, new battery cables, new wiring harness leading from the voltage reg. to the alternator. The parts I replaced were to address the truck not starting, which is no longer a problem. The truck runs good but any advice on fixing these turn signals will be greatly appreciated. I've checked the fuses and all seem to be fine. Thank-you, PapaHosers
(This post was edited by PapaHoser on Jan 1, 2013, 10:57 PM)
|
|
| |
|
nickwarner
Veteran
/ Moderator
Jan 2, 2013, 4:31 AM
Post #2 of 2
(2997 views)
|
Re: 1982 Ford F-150 Turn signals not working
|
Sign In
|
|
I would imagine if the hazards work fine then you'll be needing a new turn signal switch. Do you have the regular column or the tilt? By the way, Chevy made a 305. Your truck has a 302. I like that body style of truck. I learned how to drive in an 84 with a stick shift.
|
|
| |
|