|
|
|
lack of power while under a load
|
|
|
| |
|
|
NESTOR
New User
Oct 21, 2011, 5:21 PM
Post #1 of 2
(1283 views)
|
|
lack of power while under a load
|
Sign In
|
|
I HAVE A 2007 CHRYSLER PT CRUISER 2.4 NONE TURBO HAS NO POWER WHEN COLD HAVE CHECKED TIMMING FUEL PRESSURE IS 60 PSI AND HOLDING NO DTC'SS BARO READING 29.6 ALL SENSORS ARE GOOD HAVE LOAD TESTED SENSOR CIRCUITS PCM IS NEW RUNS VERY POOR WHEN COLD BUT RUNS WELL WHEN HOT CAT CONV IS GOOD 02 SENSORS ARE GOOD AS WELL THIS ONE IS A BITE IN THE REAR
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Oct 21, 2011, 5:30 PM
Post #2 of 2
(1275 views)
|
|
Re: lack of power while under a load
|
Sign In
|
|
What did you use to test your sensor inputs? What were your results of your tests (numbers) besides the good part? When it has no power is the engine misfiring or running rough?
If your using a scanner with data stream capabilities, give us the list when the engine has no power and when the engine is running good.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Oct 21, 2011, 5:46 PM)
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG