Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









engine stalled


  Email This Post



humphrey
New User

Apr 15, 2012, 9:01 AM

Post #1 of 7 (1710 views)
Shortcut
engine stalled Sign In

I have a jeep liberty 2006, engine 3.7L. I know that the catalytic converter is damaged,because i struck the underside going over a huge rock.My problem is while driving with the damaged cat. the engine stalled and would not restart. On checking i found some oil in the air intake and filter. would the damaged cat. caused the engine to stall and what caused oil to enter the air intake?


nickwarner
Veteran / Moderator
nickwarner profile image

Apr 15, 2012, 12:50 PM

Post #2 of 7 (1650 views)
Shortcut
Re: engine stalled [In reply to] Sign In

The oil is likely blowby going through your PCV which draws into the air intake. The PCV valve may need replacement, a cheap and simple fix. The cat is another matter entirely. If its damaged badly the honeycomb in it breaks up and the thing plugs. It won't allow the exhaust gasses to go out. Think of it as trying to breathe through a drinking straw. It definately will stall you out and cause big trouble. Its not cheap but is necessary to repair it before you drive around anymore.


humphrey
New User

Apr 15, 2012, 1:18 PM

Post #3 of 7 (1645 views)
Shortcut
Re: engine stalled [In reply to] Sign In

Thanks for the answer. Seems a very logic answer. I bought a new direct fit Cat. Cost me $500. should have it by Tuesday also i bought the four O2 sensors.I'll check the PCV valve and change if necessary.Please tell me where is the PCV valve located.


kev2
Enthusiast
kev2 profile image

Apr 15, 2012, 5:54 PM

Post #4 of 7 (1615 views)
Shortcut
Re: engine stalled [In reply to] Sign In

PCV is located on the FILL TUBE...
Always tell if the CEL is on and if you know codes
will add image as soon as I figure out how to


humphrey
New User

Apr 15, 2012, 6:11 PM

Post #5 of 7 (1611 views)
Shortcut
Re: engine stalled [In reply to] Sign In

thanks, I'll know what to look for. I'll you guys posted on how and if i solve the problem. Thanks again to all.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Apr 15, 2012, 6:45 PM

Post #6 of 7 (1606 views)
Shortcut
Re: engine stalled [In reply to] Sign In





~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



humphrey
New User

Apr 15, 2012, 7:26 PM

Post #7 of 7 (1596 views)
Shortcut
Re: engine stalled [In reply to] Sign In

Thanks for the diagram showing me the PCV valve.




engine stalled


  Email This Post
 
 






Latest Forum Post

Hi Guys, Girlfriend and I went on vacation in her 2005 escape. We get to a moder...


Greetings from cooking hot and humid SW Florida. Been getting lot's of help her...


I have just bought a 1961 Chyrsler Windsor Sedan.To cleanup then resale (I Hope)...


1976 Jeep CJ7 with AMC 305 V8, auto transmission. Vehicle rolls when in Park. Wh...


My daughter is headed to college this fall. Can anyone recommend what I should a...


2000 Camry. I just replaced all four struts and have been trying to track down a...


Feed Button






Automotive Forum Categories
AC Auto Repair
Auto Body Repair
Auto Insurance
Automotive Repair
Automotive Wiring
Automotive World
Brake Systems
Car Care Tips
Car Racing
Car Shows and Events
Car Stereo Repair
Car Troubleshooting
Engine and Car Noises
Engine Fault Codes
Engine Troubleshooting
Exhaust System Repair
Gasoline and Motor Oils
General Discussions
Motor Vehicle Inspection
Motorcycle ATV Repairs
Motorcycle Body Repair
Motorcycle Clutch Repair
Motorcycle Engine Repair
Motorcycle Repair
Motorcycle Seat Repair
Remote Control Cars
Steering and Suspension
The Bargin Bin
Traffic Ticket Help
Tricks of the Trade
Truck Repair
Truck Repair Advice
Truck Engine Repair
Truck Suspension Repair
Car Forum - Sitemap


Search for (options) Privacy

web statistics