|
|
DapprDad
New User
Jul 5, 2019, 4:05 PM
Post #1 of 4
(1533 views)
|
Year of vehicle: 2006 Make of vehicle: Ford Model of vehicle: Escape Engine size:2.3L Mileage: 75000 When my car is in park and drive it seems to want to stall unless i am giving it gas. It was throwing a P0193 and P2195. I have since replaced: Fuel Filter Upstream Oxygen Sensor Downstream Oxygen Sensor Fuel Rail Pressure Sensor Idle Air Control Valve Any idea's on what i should look at replacing next? It is no longer throwing any engine codes. I appreciate anyone's time and assistance Thank You,
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 5, 2019, 4:12 PM
Post #2 of 4
(1527 views)
|
First eliminate all vacuum or air leaks in the system (very important) Try cleaning the throttle body. Remove the intake snorkel, have someone hold the throttle wide open for you and scrub the back side of the throttle plate and surrounding bore with an old tooth brush and some carb cleaner. Be sure to spray some into the small holes next to the throttle plate. That should help stabilize the idle. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
DapprDad
New User
Jul 5, 2019, 4:47 PM
Post #3 of 4
(1519 views)
|
Thanks for reply, what is the best way to check lines?
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 5, 2019, 4:50 PM
Post #4 of 4
(1517 views)
|
If you mean check for vacuum leaks, a smoke tester is the best way. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|