|
|
A350 4.3 swap in a 1993 chevy truck
|
|
|
| |
|
Bullit
New User
Oct 6, 2009, 8:02 PM
Post #1 of 3
(4111 views)
|
A350 4.3 swap in a 1993 chevy truck
|
Sign In
|
|
HELLO, I have a 1993 chevy truck with a 4.3 v6, i want to install a 350 v8 tbi set up what parts are needed for this project, can any of the parts be reused, i know all of the front accessories can be used, alt, a/c, etc. but what about the comp. I already have the new 350, new enterior, paint and some exterior items, i want a nice looking street truck i don't want to just put a carb. on it and call it good, i want it to look factory. I am open for all info., ideals and any help. And thank you in advance for any ones help. thanks again e-mail link deleted
(This post was edited by Hammer Time on Oct 7, 2009, 2:27 AM)
|
|
| |
|
Sidom
Veteran
/ Moderator
Oct 7, 2009, 7:49 PM
Post #2 of 3
(4086 views)
|
Re: A350 4.3 swap in a 1993 chevy truck
|
Sign In
|
|
If you have any kind of smog inspection where you are at this could pose a problem, might what to check it out 1st. You definitely want to get comp & wiring harness out of the truck you are getting your 350 from & install with the motor. If not then you will probably have to go totally old school......Q-jet & HEI
|
|
| |
|
re-tired
Veteran
/ Moderator
Oct 7, 2009, 7:51 PM
Post #3 of 3
(4086 views)
|
Re: A350 4.3 swap in a 1993 chevy truck
|
Sign In
|
|
I'm going to save myself a whole lot of two finger typeing and give you a link that I think will be helpfull. clink on link : S-Series.Org • View topic - General Swap info LIFE'S SHORT GO FISH
|
|
| |
|