|
|
jimmiller603
New User
May 27, 2018, 9:38 AM
Post #1 of 3
(1095 views)
|
99durango5.9 will not starton hot days after engine warms up.starts right back up after engine is cold.runsfine when its running.cam shaft sensor did come up on codes but hasn't lately
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
May 27, 2018, 4:21 PM
Post #2 of 3
(1072 views)
|
Do you know what the code number was? Was it a P0340? No camshaft sensor signal to the computer will cause a no start. It's possible the camshaft sensor is failing when it gets hot. To verify that the sensor is failing you should make sure that it has power, ground, and no signal when it doesn't want to start. Usually you would check the sensor's signal with an oscilloscope. You might be able to use a digital multimeter to see if a signal is even being produced while cranking. It should be an average voltage of the total sensor's voltage range. To get an idea of what the signal voltage could be would be to check the sensor when it's working with your meter. Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on May 27, 2018, 4:23 PM)
|
|
| |
|
jimmiller603
New User
May 28, 2018, 6:30 AM
Post #3 of 3
(1045 views)
|
It was that code no pulse .I will check it out and let you know before I buy a new one .thanks
|
|
| |
|