|
|
|
94 cutlass ciera engine knock
|
|
|
| |
|
|
cbr651192
Novice
Apr 29, 2006, 4:35 PM
Post #1 of 4
(3558 views)
|
|
94 cutlass ciera engine knock
|
Sign In
|
|
hi everyone just looked at a 94 cutlass ciera 87000 miles 3.1 6 cyl nice car but has really loud engine knock, sounds like a rod for sure,also seems to be in front 3 cylinder area,so person wants 500.00 for car how much work is involved in this or should i just forget it have heard bad things about that 3.1 eng also other than the knock car started right up no smoke or anything but knock is load, ok thanks for any advice, and man i like this forum
(This post was edited by cbr651192 on Apr 29, 2006, 4:39 PM)
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Apr 30, 2006, 1:21 PM
Post #2 of 4
(3550 views)
|
|
Re: 94 cutlass ciera engine knock
|
Sign In
|
|
NO DON'T BUY IT. !! 3.1s have a good history but are interfence engines if the timeing chain goes wrong - the engine is a mooring!
If you can tell that the noise is just a loose spark plug or something simple go for it but if it sounds like real engine knock it won't be worth it. My opionion, T
|
|
| |
|
|
McCool
User
May 15, 2006, 11:02 AM
Post #3 of 4
(3535 views)
|
|
Re: 94 cutlass ciera engine knock
|
Sign In
|
|
I drive a pontiac 6000 which is very similar to the ceira and my engine is louder then a deisel. Let me assure you that this engine is as strong as the day it rolled off the production line. pressure tested the cylinders at a solid 120psi a piece.
Though my engine is different (2.5l 4) I would stand by this thing because it is a solid piece of machining. Given the fact that it is 20 years old, I could not be more satisfied with its performance.
The sound may be nothing at all (proof being my car) but it may mean a lot of bad things. if you;ve got $500 why not right?
|
|
| |
|
|
DanD
Veteran
/ Moderator
May 15, 2006, 12:12 PM
Post #4 of 4
(3533 views)
|
|
Re: 94 cutlass ciera engine knock
|
Sign In
|
|
Like you said $500.00 is not a lot to lose on a potential good car. But comparing a 2.5Lt four cylinder to the 3.1Lt V6 is like comparing an apple to a grape.
The older 3.1 engine was known for rods and mains failing. But hey if you’re willing to take the chance you may get away with pulling the engine, replacing the crankshaft and bearings. As long as whatever bearing is making the noise hasn’t spun in the rod or main bearing cap. If the bearing has spun then you’re into a lot more expense like rebuilding the complete bottom of the engine if it can be rebuilt.
I also know what you mean about the little iron horse the 2.5 those things would have the timing gears chattering so loud that you could here them coming down the road from a ¼ mile away and they would still keep running. That’s until the gear finally strips throwing all the fragments into the oil pan for the oil pump to suck up and seize the engine.
That is not the case with the 3.1 if it’s making any form of rod or main knock it’s not long for this world with out some internal surgery. LOL
Dan.
Canadian "EH"
|
|
| |
|
| | |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Strut spring orientation and strut mount tension nut
Please Help - Knock sound & engine fail
Brake Seals Bulging
