Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









92 volvo 960 Air Mass Meter Troubles


Search for (search options)
 



dallascarguy
New User

Mar 9, 2006, 9:04 AM

Post #1 of 5 (2393 views)
92 volvo 960 Air Mass Meter Troubles Sign In

Car started running poor. Changed coil packs w a friends car & checked wire connections. Still running Poor. AMM ( or Air flow meter) is buzzing. Manual says check resistance between & 3 & 3 connections. DOesnt say from left or right side of connector. Has anyone checked one of these? Do You know if You check resistance between 2 & 3 from Left Or Right????? Need to buy one if anyone has a used one for sale. Thanks John


DanD
Veteran / Moderator
DanD profile image

Mar 9, 2006, 4:28 PM

Post #2 of 5 (2389 views)
Re: 92 volvo 960 Air Mass Meter Troubles Sign In

Sorry I have very little experience with Volvo’s.
Dan.

Canadian "EH"






Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Mar 10, 2006, 4:36 AM

Post #3 of 5 (2384 views)
Re: 92 volvo 960 Air Mass Meter Troubles Sign In

800-541-0280 contact John for used parts but used is used so ayor. T



fatshady
User

Mar 18, 2006, 7:51 AM

Post #4 of 5 (2337 views)
Re: 92 volvo 960 Air Mass Meter Troubles Sign In

we had an '86 240G that we sold a couple of years ago and we did have to change the AMM a little before we sold it. on this one you could hold the amm up to the light and actually see that one of the little cross hair wires was broken. that is probably not the only way they go bad. we found one at the junk yard for $50 and it worked fine as long as we had it. we had a haynes or a chiltons that tells how to check the resistance and i don't remember exactly how it described to orient the pin locations for testing, but i will see if i can find that manual.


fatshady
User

Mar 19, 2006, 6:57 PM

Post #5 of 5 (2328 views)
Re: 92 volvo 960 Air Mass Meter Troubles Sign In

I found my old haynes manual for the volvo. it covers '76 thru '93 models and it indicates that the 92 might be the LH 2.4 or the LH 3.1 jetronic fuel injection system. the 3.1 started using a hot film in place of the platinum crosshair wires. Either way if you can drive it to autozone or similar store they should be able to see if it has some trouble codes stored (maybe only if there is a check engine light on). if yours is the hot film version this book says disconnect it and measure between 1 (green yellow) and 4 (red/ white). it should be 108 ohms.






 
 
 






Search for (options) Privacy Sitemap