|
|
|
2005 Dodge Ram 1500 4.7L hesitates
|
|
|
| |
|
|
Cnielson986
New User
Feb 26, 2014, 7:26 PM
Post #1 of 10
(4478 views)
|
|
2005 Dodge Ram 1500 4.7L hesitates
|
Sign In
|
|
I have a Dodge Ram 2005 1500 with the 4.7L v8. It only has 26k miles on it. It started to have a hesitation issue about a year ago. Ill start it in the morning and back down my driveway with no issues. When inshift it into drive from reverse, it hesitates. The rpms drop very low. The rpms do return to normal once i start moving but sometimes it does stall. It also does a similar thing when im driving and come to a stop where the rpms will drop lower than they are supposed to and then when they rise up again, the vehicle jumps slightly forwsrd.
I just replaced the idle air control valve but the issue is still present. I have also hooked up a scan tool and there arent any sensors lacking voltage so Really stumped here, any suggestions would definitely help.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Feb 26, 2014, 7:42 PM
Post #2 of 10
(4471 views)
|
|
Re: 2005 Dodge Ram 1500 4.7L hesitates
|
Sign In
|
|
Where there any trouble codes stored?
Have you tried cleaning the throttle body bore and throttle valve?
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Feb 26, 2014, 7:43 PM)
|
|
| |
|
|
Cnielson986
New User
Feb 27, 2014, 5:36 AM
Post #3 of 10
(4446 views)
|
|
Re: 2005 Dodge Ram 1500 4.7L hesitates
|
Sign In
|
|
No codes. But i have not tried cleaning out the throttle body. How would i go about doing that?
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Feb 27, 2014, 5:39 AM
Post #4 of 10
(4445 views)
|
|
Re: 2005 Dodge Ram 1500 4.7L hesitates
|
Sign In
|
|
Take the air duct off, so you can get to the throttle body. Then take some carb cleaner on a rag and wipe down the inside of the throttle bore. You can also use an old tooth brush. Clean out the carbon. It is also good to remove the idle air control valve and use a pipe cleaner or equivalent to clean out the pintle bore.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Feb 27, 2014, 5:42 AM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Feb 27, 2014, 8:16 AM
Post #5 of 10
(4429 views)
|
|
Re: 2005 Dodge Ram 1500 4.7L hesitates
|
Sign In
|
|
I wouldn't re-use the toothbrush though.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
GC
User
Feb 27, 2014, 11:37 AM
Post #6 of 10
(4420 views)
|
|
Re: 2005 Dodge Ram 1500 4.7L hesitates
|
Sign In
|
|
____________________________________________________
Willing to help, willing to learn... Rob
(This post was edited by GC on Feb 27, 2014, 11:38 AM)
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Feb 27, 2014, 6:34 PM
Post #7 of 10
(4405 views)
|
|
Re: 2005 Dodge Ram 1500 4.7L hesitates
|
Sign In
|
|
That must be the Meth clinic Nick was talking about.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
Cnielson986
New User
Mar 6, 2014, 7:23 AM
Post #8 of 10
(4360 views)
|
|
Re: 2005 Dodge Ram 1500 4.7L hesitates
|
Sign In
|
|
Just cleaned out throttle body. Wasn't that dirty. Still hesitates and stumbles. I did use air intake cleaner, not carb cleaner.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Mar 6, 2014, 8:40 AM
Post #9 of 10
(4358 views)
|
|
Re: 2005 Dodge Ram 1500 4.7L hesitates
|
Sign In
|
|
Read container as it should really be the same stuff. The name "carb cleaner" just stuck. Essentially a spray formulation of lacquer thinner or close,
T
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Mar 6, 2014, 5:04 PM
Post #10 of 10
(4338 views)
|
|
Re: 2005 Dodge Ram 1500 4.7L hesitates
|
Sign In
|
|
You stated you had a scanner on it. Were you monitoring the data stream when the problem was occurring? Some scanners can record the data stream, so you can get data stream information when the problem is occurring. Then you can go back and review the data to see if there is anything odd.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Mar 6, 2014, 5:06 PM)
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Strut spring orientation and strut mount tension nut
Please Help - Knock sound & engine fail
Brake Seals Bulging
