|
|
2001 Dodge Grand Caravan 3.8 V6
|
|
|
|  |
|

jake652000
New User
Jun 29, 2013, 2:40 PM
Post #1 of 3
(1489 views)
|
2001 Dodge Grand Caravan 3.8 V6
|
Sign In
|
|
Van ran fine. One day it would not start, would fire and sputter but not run. Few hours later it started and ran fine, but engine lite stayed on. Dove home and next time would not start or run. Small town Chrysler dealer checked it and said it was a vaccum leak or map sensor. Replaced sensor and van ran fine. but went back to same problem. My question is What other sensor could cause a no run situation like mine. All vaccum lines checked out ok.
|
|
|  |
|

Hammer Time
Ultimate Carjunky
/ Moderator

Jun 29, 2013, 6:07 PM
Post #2 of 3
(1455 views)
|
Re: 2001 Dodge Grand Caravan 3.8 V6
|
Sign In
|
|
What makes you so sure the problem is going to be a simple as replacing a sensor? You need to check for current codes being stored and i would rig up a fuel pressure gauge and monitor it while the problem is occurring. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
|  |
|