|
|
|
2000 Lexus wont turn over, harmonic balancer?
|
|
|
| |
|
|
jmartinez
Novice
Nov 2, 2011, 2:39 PM
Post #1 of 11
(2103 views)
|
2000 Lexus wont turn over, harmonic balancer?
|
Sign In
|
|
2000
Lexus
ES300
3.0
120k mi
so i jus bought this car, guy said its been sitting for 4 months, wouldnt start, ran OBD2, code p0335- CPS. Replaced CPS, now car turned over... but with knocking noise. figured sludgy oil is all on the bottom, replaced gas, flushed fluids, did oil change. started her back up. she started, then died 10 seconds later. engine stopped spinning. 3 pulleys on on belt, car is dual belt. i was able to spin alt pulley and loosen belt to try and turn her over, car startedm then died. sounds like somethin stuck. spinned a/c pulley and was able to loosen belt, car turned over and shut off again. i was told maybe its the harmonic balancer, maybe its the crank pulley itself. please help!
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Nov 2, 2011, 2:58 PM
Post #2 of 11
(2085 views)
|
|
Re: 2000 Lexus wont turn over, harmonic balancer?
|
Sign In
|
|
You might be able to see it wobble with just cranking or out of line by eye even without running. May be wrong but didn't think it was common on those cars,
T
|
|
| |
|
|
jmartinez
Novice
Nov 2, 2011, 2:59 PM
Post #3 of 11
(2081 views)
|
|
Re: 2000 Lexus wont turn over, harmonic balancer?
|
Sign In
|
|
SHE WONT CRANK NOW AT ALL, LIKE IT JUST FROZE UP 
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 2, 2011, 3:03 PM
Post #4 of 11
(2075 views)
|
|
Re: 2000 Lexus wont turn over, harmonic balancer?
|
Sign In
|
|
It may be froze up. Put a socket on the crank bolt and see if it turns easily.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
jmartinez
Novice
Nov 2, 2011, 3:11 PM
Post #5 of 11
(2066 views)
|
|
Re: 2000 Lexus wont turn over, harmonic balancer?
|
Sign In
|
|
if its froze, then im screwed huh. im gonna remove the belts and spin the pulleys tomorrow, if the crank is stuck, then im screwed.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 2, 2011, 3:13 PM
Post #6 of 11
(2063 views)
|
|
Re: 2000 Lexus wont turn over, harmonic balancer?
|
Sign In
|
|
That pretty much sums it up.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
jmartinez
Novice
Nov 2, 2011, 3:15 PM
Post #7 of 11
(2059 views)
|
|
Re: 2000 Lexus wont turn over, harmonic balancer?
|
Sign In
|
|
and if the CP spins?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 2, 2011, 3:17 PM
Post #8 of 11
(2055 views)
|
|
Re: 2000 Lexus wont turn over, harmonic balancer?
|
Sign In
|
|
Then you look at the starter and starting circuit to find out why the starter isn't doing it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
jmartinez
Novice
Nov 2, 2011, 3:22 PM
Post #9 of 11
(2052 views)
|
|
Re: 2000 Lexus wont turn over, harmonic balancer?
|
Sign In
|
|
yet, the starter wouldnt cause the vehicle to stall once on, no?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 2, 2011, 3:39 PM
Post #10 of 11
(2046 views)
|
|
Re: 2000 Lexus wont turn over, harmonic balancer?
|
Sign In
|
|
No, it wouldn't. It doesn't look promising.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
jmartinez
Novice
Nov 2, 2011, 3:40 PM
Post #11 of 11
(2042 views)
|
|
Re: 2000 Lexus wont turn over, harmonic balancer?
|
Sign In
|
|
damn
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Strut spring orientation and strut mount tension nut
Please Help - Knock sound & engine fail
Brake Seals Bulging
