1999 Blazer smoking after rebuild - Engine Troubleshooting


	Auto Repair Home	SEARCH POSTS	WHO'S ONLINE	LOG IN

Automotive Repair

Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:
  Login
  Sign up here!

Latest Forum Post

Strut spring orientation and strut mount tension nut

2017 Nissan rogue awd 2.5 L Put in Monro...

Transmission stuck in part, I have tried everything

So I'm working on my elderly fathers 201...

2017 dodge journey LED headlights on/off randomly

Year of vehicle 2017 Make of vehicle dod...

Kia Soul starter replacement issues!

Okay so my car is a 2010 Kia soul 2.0 en...

Please Help - Knock sound & engine fail

Hi all, Hoping to get some insight and ...

multiple warning lights

2013 GMC Terrain 130,000 miles 4 cylinde...

03 alero no low speed blower

Good day everyone, I have a 2003 Olds a...

04 Chevy 2500hd tail light issues

Help!!! I have changed my combo switch...

1999 Grand Caravan Sport not starting.

Hi. I'm new here. I hope someone can hel...

Brake Seals Bulging

2021 Toyota Corolla LE 1.8l 65,000 mile...

1999 Blazer smoking after rebuild

Sign up here!

Search for (search options)

Auto Repair Home>> Automotive Repair>> Engine Troubleshooting

Roadster
New User

Apr 1, 2010, 6:52 AM

Post #1 of 3 (2328 views)

1999 Blazer smoking after rebuild	Sign In

I recently had the 4.3 vortec engine rebuilt by a machine shop, it has all new seals, gaskets, new rings, pistons, crank turned, basically the works. I installed the engine last weekend, set all the timing per the manual and the things started right up...was a proud moment..! After the initial smoking of residual oil, I then drove the blazer a few hundred miles now doing all the engine break-in recomendations. The blazer actually runs fine, no weird noises, starts right up, etc. Here is the issue....When the blazer is cold is starts with no blue smoke, as it warms up, it will start to smoke, and if it is sitting in traffic it will puff at first acceleration. If it sits and idles it will smoke and gradually get thicker. It does not smoke driving down the hwy, and will not smoke after it sits for more than an hour until it gets warmed up again. I am so baffled as to what is wrong. Talked with a few mechanics and they just want me to let them know what is wrong AFTER I find the issue. Nice guys. I have checked the PCV valve and it works fine. I know it is not a ring problem or it would smoke all the time, and very thick....I am looking for help....ideas....the answer?

Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Apr 1, 2010, 5:16 PM

Post #2 of 3 (2320 views)

Re: 1999 Blazer smoking after rebuild	Sign In

I would venture to guess that your heads had some worn out valve guides which those engines are notorious for and he never replaced them. He probably just put new seals in. Your likely going to have to pull the heads back off.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.

Roadster
New User

Apr 1, 2010, 6:34 PM

Post #3 of 3 (2311 views)

Re: 1999 Blazer smoking after rebuild	Sign In

I appreciate your reply and advice, I guess I thought that same answer but was really hoping for something alot easier. I'm alittle PO'd that a machine shop would not replace the guides knowing they are replacing everything else. Thanks.

Search for (options) Privacy Sitemap